2.5 Hardware setup procedure
Power off your PC, remember unplug the AC power cable
Insert A400E into a PCI-E slot
Put timing cable correctly if necessary, for more details, please refer
to
Please plug PSTN lines into FXO ports and extension telephone lines
into FXS ports before you have detected your PSTN line works well.
Fix the board by a screw
Power on PC
install or take down the board. Do not forget to connect PSTN lines into
OpenVox Communication Co. LTD.
http://ArtTel.ru
HERE
LED
Port
Caution: If any FXS module is setup, you should make
power on. During the above processes, an ESD wrist strap
is needed. Once power is on, you must not attempt to
A400E on DAHDI User Manual
Power supply connector
PCI-E
Figure 4 Hardware setup
slot
× 1
URL: www.openvox.cn
12