Service Power Supply; Earthing / Grounding - Mitsubishi FX1S series Hardware Manual

FX1S Series Programmable Controllers
4.6

Service Power supply

An AC powered FX
A DC powered FX
4.7

Earthing / Grounding

Use a cable at least 0.2mm
than 100Ω. Note that the ground cable must not be connected to the same ground as the
power circuits.
can supply a service current of 24V DC at 400mA.
1S
does not have the capacity to supply a service current.
1S
2
(AWG24) to ground equipment. Ground resistance must be less
Power Supply 4
4-6