Coffee Preparation; Programming The Water Volume - Nespresso Inissia User Manual

Coffee preparation

EN
1. rinse then fill
the water tank with
potable water.
CAUTION: never lift lever during operation and refer to the safety precautions to avoid possible harm
3. Lift the lever
when operating the appliance.
completely and insert
NOTE: during heat up, you can press either coffee button while blinking. the coffee will then flow
a Nespresso capsule.
automatically when the machine is ready.
4. Close the lever and
place a cup under the
coffee outlet.
8
6477_UM_BASIC-D_Z2A_MASTER_2013_NESP_CLUB_EN_IL_V2.indd 8-9
2. press the espresso or Lungo button Blinking Lights: heating
to activate the machine. up (25 sec.)
steady Lights: ready
5. press the espresso (40 ml) or the Lungo 6. remove the cup. Lift
(110 ml) button to start. preparation will and close the lever to eject
stop automatically. to stop the coffee flow the capsule into the used
or top up your coffee, press again. capsule container.

proGraMMinG tHe water voLuMe

1. turn the machine on and
wait for it to be in ready
mode (steady lights).
4. press and hold the 5. release button once the desired
espresso or Lungo button. volume is served.
2. fill the water tank with 3. place a cup under
potable water and insert a the coffee outlet.
Nespresso capsule.
6. water volume level is
now stored.
3X
EN
9
11.02.14 14:05