Reset To Factory Settings - Nespresso Inissia User Manual

eMptyinG tHe systeM Before a perioD of non-use anD
EN
for frost proteCtion, or Before a repair
1. to enter the emptying mode,
press both the espresso and
Lungo buttons to turn the
machine off.
Both LeDs blink
alternatively.
10
6477_UM_BASIC-D_Z2A_MASTER_2013_NESP_CLUB_EN_IL_V2.indd 10-11
2. remove the water tank 3. press both the espresso
and open the lever. and Lungo buttons for
3 seconds.
4. Close the lever. 5. Machine switches 6. empty and clean the
off automatically. used capsule container
and drip tray.

reset to faCtory settinGs

1. with machine being
turned off, press and hold
down the Lungo button for
5 seconds.
Factory settings
3. LeDs will then continue to blink
normally, as heating up, until ready. espresso Cup: 40 ml
Lungo Cup: 110 ml
power off mode: 9 min.
steady lights: machine ready
2. LeDs will blink fast 3 times to
confirm machine has been reset
to factory settings.
3X
EN
11
11.02.14 14:05