Page 1
User Manual Model 1715 Headphone Demonstration Amplifier...
Page 2
Larger switching systems, linked by Expansion Bus and audio patch cords, can allow one live position on each 1715 or one live position in the entire system (see Expansion Bus). When a demo session times out, the headphones are silent.
Page 3
When audio is detected on the Customer Input jack, the customer device is automatically selected as the audio source. If no audio is detected on the Customer Input for 3 seconds, the 1715 switches back to the Default Input.
Page 4
GAIN DIAL wish to demonstrate. • Turn the 1715 Gain dial (see chart below) to 1 and start the music player. • Select a headphone position, and raise the 1715 Gain dial to the point of distortion, then adjust it down to the desired maximum level.
Need help?
Do you have a question about the 1715 and is the answer not in the manual?
Questions and answers