User Manual Model 1710A Headphone Demonstration Switching Amplifier...
Page 2
1710A, or the entire system can be limited to one active position at a time (see Feature Switch settings). Visit audioauthority.com/demobeat for tips and application diagrams.
1710A modules or other audio devices in the system. Connect a 3.5mm patch cord from the first 1710A bus output to the second 1710A Default input, etc. One linked system sharing a Default Input also must share one Customer input (do not use any Customer inputs besides the first 1710A).
Page 4
Activate theft detection using feature switch #3. The 1710A can detect most headphones when connected directly to the 1710A. If not, you must connect the product through an Audio Authority extension cable. All devices should be tested for proper detection behavior upon installation.
Need help?
Do you have a question about the 1710A and is the answer not in the manual?
Questions and answers