11.1.6.1
Wire Stripping and Connecting Requirement
No loose strand when inserted
Do not joint wires
WARNING
RISK OF FIRE
JOINING OF WIRES MAY CAUSE
OVERHEATING AND FIRE.
Use complete wire without joining.
Use approved socket and plug with earth pin.
Wire connection in this area must follow to national wiring rules.
Wire stripping
Indoor/outdoor
connection
terminal board
7 /32" (5 mm)
or more
(gap between wires)
Conductor
fully inserted
ACCEPT
OR
42
Conductor not
Conductor
fully inserted
over inserted
PROHIBITED
PROHIBITED
OR
OR