Base Controls
(3215/3219)
1
2
3
Figure 2-3b. Base Control Box 3215/3219
1-
Platform Up/Down Selector Switch - This
selector type switch raises or lowers the platform
to a desired height.
2 -
Enable Switch - This switch, when activated,
brings power to the Lower Base Control
3-
Emergency Stop Button - This red "mushroom-
head" shaped button switch is designed to
disengage power to the platform controls.
Platform Controls
Powered Extension Platform Control Box
1
Figure 2-4. Powered Extension Control Box
Powered Extension Platform Control Box
1-
Enable Switch - This switch, when activated,
brings power to the Platform Extend/Retract
Selector Switch.
2-
Platform Extend/Retract Selector Switch - This
switch, when activated, extends or retracts the
platform.
SECTION 2, Page 14
Operator's Control Box
5
6
7
8
Figure 2-5. Operator's Control Box
Operator's Control Box
This metal control station is mounted at the right front
of the platform. It contains the following controls:
1-
Off/On Key Switch (ANSI and CSA)-
Disconnects or energizes the control circuit in
the operator's control box.
2-
Platform/Off/Base Select Key Switch (CE) -
2
This three-way selector switch allows the
operator to turn off the power to the unit or to
activate either the base or platform controls.
3-
Proportional Controller - A one-hand toggle-
type lever to control proportional drive/lift
motion. It is a "deadman" control which returns
to neutral when released.
4-
Lift/Drive Enable Switch - This momentary
"Trigger" style switch energizes the proportional
controller.
continuously while engaging either the drive/lift
or steer functions.
5-
Operator Horn Push-Button - This momentary
push-button switch activates an automotive-type
horn.
6-
High/Normal Torque Select Toggle Switch -
This switch selects "HIGH" torque (low speed)
or "NORMAL" torque (high speed). (Models
3220, 3226)
Dec. 2002
It must be held depressed
SJIII Series - The COMPACTS &
CONVENTIONALS
122908AD
4
3
2
1