Installation And Operation - Bofan PT502 User Manual

3. Installation and Operation

Note:
When test tracker in office, please charge the tracker via 12V external power charger for 3 hours at
least before following below steps, once you connect the tracker power wire (red/black) to external
power supply wire directly, it is in charging.
The SIM card must support GPRS service, support calling and SMS service, can display caller's ID.
It is a GSM card not CDMA card. And please disable the SIM card PIN code.
First step, install the SIM card
Press the yellow button to eject the SIM card Holder, Push it back after SIM card inserted.
Second step, connection
Basic connection as the following table is NEEDED:
Connect the GSM Antenna
Third step, turn on the tracker
Connect the GPS Antenna, put
the GPS antenna black side
upside face the sky
Connect the wires to tracker, and also
connect red wire to vehicle battery (+),
black wire to vehicle battery (-).
5