Sms Commands List - Bofan PT502 User Manual

engine.
Please don't use this feature while car/vehicle with high-speed driving, and we suggest connect relay with
fuel control line in your car, Bofan is not liable for any traffic accidents.
Buzzer:
Sending SMS command 000000OPC1,1 to tracker to trigger buzzer for one time
It also can be set to automatically triggered by other alarms
For example, Speed Alarm
First you need to set Speed Alarm (both are ok by SMS or in FMS)
Second sending two SMS commands 000000AN1'#OPC1,1,',10,'#OPC1,0' and
000000SALSPD10001 to tracker.
Note: the fifth parameter in SALSPD is for the AN command number, AN1
2 at fifth parameter, parameter 1

6. SMS Commands List

Note: the device password is 000000 as default
Get tracker firmware version
Command <password>VER
Remarks VER=Version
For example: 000000VER
Get current location
Command <password>RCP
Remarks Get current location's latitude and longitude of PT502
Get Google map link by SMS request
Command <password>RCM
Remarks This command is still valid even don't configure PT502's GPRS connecting
Change password
Command <password>PWD<new password>
Remarks PWD=Password (must be 6 digits)
Reset password when the previous password is forgotten
Command 000000RPW<new password>
Remarks Please long press the SOS button when you send this command to PT502
(new password must be 6 digits)
Set preset phone number for SOS button
Command <password>SOS,<SOSNumber1>,<SOSNumber2>,<SOSNumber3>
Remarks SOS Number: Preset phone number to receive phone call or SMS from PT502. Max 16
digits. Maximum 3 SOS numbers can be set.
If only set the 1st number, PT502 will send SMS and then call to this first number after
pressing SOS button.
Buzzer keeps working for 10 seconds,
st th
to 4 details, please refer to command list.
1 at fifth parameter, AN2
13