Configuration Of The Dip-Controller; Installing The Dip Software - Agilent Technologies 5975 MSD Service Manual

connecting diagram GC-MS-DIP Controller
GC
MSD
Diode Cable Remotemanager
B 0613 59 73 RM 0002 68 90
2.5

Configuration of the DIP-Controller

The IP adress is assigned in the menu "Network configuration " of the DIP controller (see
MSD DIP Manual, 5.5 Network configuration):
1. Turn on the DIP controller.
2. Select the menu "Network configuration" and scroll with the "arrow up" and "arrow
down" key in the parameters.
3. Set the parameter "DHCP Mode" to "Fixed IP".
4. Select the parameter "IP adress" with the "Enter" key and change the numbers with
the arrow keys.
5. Skip back to the basic display by pressing the "arrow right" key two times.
Or the IP-adress is assigned automatically if the modus "DHCP" is selected (see MSD DIP
Manual, 5.5):
1. Turn on the DIP controller.
2. Select the menu "Network configuration" and scroll with the "arrow up" and "arrow
down" key in the parameters.
3. Set the parameter "DHCP Mode" to "DHCP" (see).
4. Skip back to the basic display by pressing the "arrow right" key two times.
2.6

Installing the DIP Software

Note: You can find all files with software and default methods on the disc enclosed.
1. Copy the files "DIP.exe, dip.enu, dip.deu" into the new folder "DIP".
2. Copy the default methods in the folder "DIP\Methods"
3. Open the "DIP"-Software.
4. Click on "File" and open the menu "Config.".
5. Select the DIP controller with a click on the IP adress.
DIP
Controller
Start-Remote-Cable
B 0301 40 02
- 9 -
Scientific Instruments Manufacturer GmbH
D-46149 Oberhausen • +49-208-94 10 78-0 • www.sim-gmbh.de