The Buttons On The Remote Control - RCA 15491880 User Manual

Using the Remote Control
L.E.D.
SOUND 00 BACK
GUIDE INFO
0 O
MENU CLEAR
,0 80 90
WHO.INPUT ANTENNA
0°0 0
REVERSE PLAY FORWARD
REC'VCR* STOP PAUSE
The Buttons on the Remote Control
0-9 (Number buttons) Enter channel numhers and time settings directly
through the remote control.
To enter a two-digit channel, press tile t\\o digits. To enter a three-digit channel.
press and hold the first digit for two seconds until two dashes appear to the
right of the number, then add the second two. Example: to tune to channel 123,
press and hold 1 for two seconds, press 2, then press 3,
Arrow buttons (up, down, left, right) Press the arrow buttons
to move
throttgh
the on-screen
menu system.
ANTENNA Functions as TV!VCg buttoi1 in VCR mode and TV/receiver button
in SAT'CABLE n'tode.
AUX (auxiliary) Puts the remote in atixilim T mode to operate the component
you've programmed the remote to operate with this button. You can program
this button to control a cable box, most RCA, GE and PROSCAN audio
components, a laserdisc playe_; or a VCR. If you set up the Auto Tuning feature
(Chapter 3), pressing the AUX button automatically tunes the TV to the
correct channel.
CH (up and down) buttons Scan tap or down through the current channel list.
Press once to change the channel tap or down; press and hold to continue
changing channels.
CLEAR Removes any menu or display from the screen and returns you to
TV viewing.
DVD Puts the remote in DVD mode. If you set up the Auto Tuning feature
(Chapter 3), pressing the DVD button atttomatically tunes the TV to the
correct channel.
FORWARD If you're operating a VCR or DVD Player with the remote control,
press FORWARD to advance a disc or videotape.
GO BACK Returns you to the previous channel.
GUIDE Press GUIDE to make the GUIDE Plus+ system appear on the screen:
press GUIDE again to remove it from the screen.
INTO Displays channel information.
LE.D. (light-emitting diode) The little light on the remote that lights when you
are programming the remote. It also lights when you press a valid button on
the remote.
MENU Displays the TV's Main menu. You can also press and hold for 2
seconds to display the GUIDE Plus+ system.
MUTE Lowers the volume to its minimum level, Press again to restore volume.
OK When a menu is on the screen, press OK to select the item that
is highlighted.
ON-OFF
Turns the TV on alld off. When the remote is in another mode (VCR,
DVD, Satellite, etc.) and the remote is programmed to operate that component,
you can press ON*OFF to turn the component on and off.
22 Chapter 2