RCA 15491880 User Manual page 16

Connections & Setup
Plug in the TV
Plug the end of the p(n.,.er cord into the wall outlet. Match the wide blade of the
plug with the xxide slot in the outlet, lnselt tile plug completely into
ttae outlet.
\
\
\
\
Put Batteries in the Remote
1. Remove the battery compartmel'lt cover nrl the remote.
2. Insert new batteries. Match the polarities (+ and -_ on the batteries with the
(liagmn_ on the remo;e.
3r Put the battel T conlpartnlent cover hack (nl {lie renlote.
_] -.-, j
Use the arrow buttons and the OK
button to move through the menu
system.
How to Use the Remote Control to
Complete the Interactive Setup
The technical term is "Navigation" - how you move through the on-screen
menus. The theow is the same throughout the menu screens: highlight your
choice and select it.
To highlight a ntenu item, press the arrow buttons on the remote to highlight
one of the items listed on the screen. Use the up or down arrow button to move
up or down. Use the right or left arrow button to move right or left.
To select the item that you've highlighted, press OK.
Note: Highlighted means that the menu item stands out from
other menu items on the list (appears darker, brighter, or a
different color).
Turn on the TV
Press the TV button on the remote control or the POWER button on the TV (the
first screen of the Interactive Setup appears), The menu screens "time out" after
a period of time if you don't make a selection. The tips in this section tell you
how to access the Setup menu screens manually.
Note: Pressing the TV butto*_ not only turns on the TV, but puts the
remote into TV mode. "TV mode" means that the buttons on the remote
control operate the TV's fi_nctions.
14 Chapter1