The Buttons On The Remote Control - RCA F19432 User Manual

Connections & Setup
POWER
GO
VOL
BACK
MUTE
GUIDE
MENU
1 2
4 5
8
7
SLEEP
0
20

The Buttons on the Remote Control

0-9 (Number buttons) Enter channel numbers and time settings directly
through the remote control.
To enter a two-digit channel, press the two digits. To enter a three-digit channel,
press and hold the first digit for two seconds until two dashes appear to the
CHAN
right of the number, then add the second two. Example: to tune to channel 123,
press and hold 1 for two seconds, press 2, then press 3.
INFO
Arrow buttons (up, down, left, right) Press the arrow buttons to move
through the on-screen menu system.
CH (up and down) buttons Scan up or down through the current channel list.
Press once to change the channel up or down; press and hold to continue
changing channels.
CLEAR
CLEAR Removes any menu or display from the screen and returns you to
3
TV viewing.
6
GO BACK Returns you to the previous channel.
GUIDE Press GUIDE to make the GUIDE Plus+ system appear on the screen.
9
Press GUIDE again to remove it from the screen.
SKIP
INFO Displays channel information.
MENU Displays the TV's Main menu. You can also press and hold for 2 seconds
to display the GUIDE Plus+ system.
MUTE Lowers the volume to its minimum level. Press again to restore volume.
OK When a menu is on the screen, press OK to select the item that
is highlighted.
POWER Turns the TV on and off.
SKIP If you press this button before you change the channel, the TV waits 30
seconds and automatically goes back to the original channel. Each time you
press SKIP, you add 30 seconds (i.e, if you press SKIP two times before you
change the channel, the TV waits 60 seconds and automatically turns back to the
original channel).
SLEEP Allows you to select the amount of time you want to give the TV before
it shuts itself off.
VOL (up and down) buttons Decrease or increase the TV's volume.
Chapter 1