The Buttons On The Remote Control - RCA F27450, F32444, F32450, F36444, F36450 User Manual

Using the Remote Control
L.E.D.
ON OFF
VCR1
DVD VCR2 AUX
MUTE
SOUND
GUIDE
OK
MENU
1 2
4 5
8
7
WHO INPUT
0
REVERSE PLAY
REC•VCR+ STOP
22

The Buttons on the Remote Control

0-9 (Number buttons) Enter channel numbers and time settings directly
through the remote control.
TV
To enter a two-digit channel, press the two digits. To enter a three-digit channel,
press and hold the first digit for two seconds until two dashes appear to the
SAT CABLE
right of the number, then add the second two. Example: to tune to channel 123,
press and hold 1 for two seconds, press 2, then press 3.
SKIP
Arrow buttons (up, down, left, right) Move through the on-screen menu
system.
ANTENNA Functions as TV/VCR button in VCR mode and TV/receiver button
in SAT•CABLE mode.
AUX (auxiliary) Puts the remote in auxiliary mode to operate the component
GO BACK
you've programmed the remote to operate with this button. You can program
INFO
this button to control a cable box, RCA audio components, a VCR or satellite
receiver. If you set up the Auto Tuning feature (Chapter 3), pressing the AUX
button automatically tunes the TV to the correct channel.
CH (up and down) buttons Scan up or down through the current channel list.
Press once to change the channel up or down; press and hold to continue
CLEAR
changing channels.
3
CLEAR Removes any menu or display from the screen and returns you to
6
TV viewing.
DVD Puts the remote in DVD mode. If you set up the Auto Tuning feature
9
(Chapter 3), pressing the DVD button automatically tunes the TV to the
ANTENNA
correct channel.
FORWARD
FORWARD If you're operating a VCR or DVD player with the remote control,
press FORWARD to advance a videotape or disc.
PAUSE
GO BACK Returns you to the previous channel.
GUIDE Displays the GUIDE Plus+ system; press GUIDE again to remove it from
the screen.
INFO Displays channel information.
L.E.D. (light-emitting diode) The little light on the remote that lights when you
are programming the remote. It also lights when you press a valid button on
the remote.
MENU Displays the TV's Main menu. You can also press and hold for 2
seconds to display the GUIDE Plus+ system.
MUTE Lowers the volume to its minimum level. Press again to restore volume.
OK When a menu is on the screen, press OK to select the item that is
highlighted.
ON•OFF Turns the TV on and off. When the remote is in another mode (VCR,
DVD, Satellite, etc.) and the remote is programmed to operate that component,
you can press ON•OFF to turn the component on and off.
Chapter 2