The Buttons On The Remote Control - RCA F32649 User Manual

Using the Remote Control
L.E.D.
ON OFF
VCR1
DVD VCR2 AUX
MUTE
SOUND
GUIDE
OK
MENU
1 2
4 5
8
7
WHO INPUT
0
REVERSE PLAY
REC•VCR+
STOP
24

The Buttons on the Remote Control

0-9 (Number buttons) Enter channel numbers and time settings directly
through the remote control.
TV
To enter a two-digit channel, press the two digits. To enter a three-digit channel,
press and hold the first digit for two seconds until two dashes appear to the
SAT CABLE
right of the number, then add the second two. Example: to tune to channel 123,
press and hold 1 for two seconds, press 2, then press 3.
SKIP
Arrow buttons (up, down, left, right) Press the arrow buttons to move
through the on-screen menu system.
ANTENNA Functions as TV/VCR button in VCR mode and TV/receiver button
in SAT•CABLE mode.
AUX (auxiliary) Puts the remote in auxiliary mode to operate the component
GO BACK
you've programmed the remote to operate with this button. You can program
INFO
this button to control a cable box, most RCA, GE and PROSCAN audio
components, a laserdisc player, or a VCR. If you set up the Auto Tuning feature
(Chapter 3), pressing the AUX button automatically tunes the TV to the
correct channel.
CH (up and down) buttons Scan up or down through the current channel list.
CLEAR
Press once to change the channel up or down; press and hold to continue
3
changing channels.
6
CLEAR Removes any menu or display from the screen and returns you to
TV viewing.
9
DVD Puts the remote in DVD mode. If you set up the Auto Tuning feature
ANTENNA
(Chapter 3), pressing the DVD button automatically tunes the TV to the
correct channel.
FORWARD
FORWARD If you're operating a VCR or DVD Player with the remote control,
PAUSE
press FORWARD to advance a disc or videotape.
GO BACK Returns you to the previous channel.
GUIDE Press GUIDE to make the GUIDE Plus+ system appear on the screen:
press GUIDE again to remove it from the screen.
INFO Displays channel information.
L.E.D. (light-emitting diode) The little light on the remote that lights when you
are programming the remote. It also lights when you press a valid button on
the remote.
MENU Displays the TV's Main menu. You can also press and hold for 2
seconds to display the GUIDE Plus+ system.
MUTE Lowers the volume to its minimum level. Press again to restore volume.
OK When a menu is on the screen, press OK to select the item that
is highlighted.
ON•OFF Turns the TV on and off. When the remote is in another mode (VCR,
DVD, Satellite, etc.) and the remote is programmed to operate that component,
you can press ON•OFF to turn the component on and off.
Chapter 2