Technical Specification - Blackstar ID:CORE STEREO 100 Owner's Manual

Firmware Update
Firmware updates are initiated via the Blackstar INSIDER software. A new version
of the Blackstar INSIDER software will be released whenever an update is available.
Important note: Always connect the amplifier to a main USB port (usually found on
the on the rear of your PC or Mac) when updating the firmware. Never use a front
mounted USB port, USB hub or a USB extension cable. Doing so may result in a
failed update, which could cause your amplifier to become unresponsive.
When the amplifier is connected (via USB) to a version of the Blackstar INSIDER
software containing newer firmware, a message will be displayed prompting you
to install the latest files. Whilst updating, the amplifier controls will be unresponsive.
Front panel voice LEDs will cycle to indicate data activity during the update process.
The amplifier power should not be switched off during a firmware update. If the
amplifier is switched off during an update, the controls may be unresponsive after
the power is reapplied and the amplifier will produce no sound. The voice LEDs will
cycle to indicate that the amplifier contains no valid firmware.
If you are experiencing problems with the firmware update process the amplifier
can be forced to power up in Update Mode. Hold down the Manual (17) & MOD (9)
switches simultaneously, whilst switching on the amplifer to enter this mode with the
voice LEDs cycling to indicate Update Mode. Connect the amplifier to the Blackstar
INSIDER software to begin a firmware updae.
The amplifier must be connected to the Blackstar INSIDER software to reinstall
valid firmware. The update process will start automatically if the Blackstar INSIDER
software detects that the amplifier is in this state.

Technical Specification

ID:CORE STEREO 100
Power: 2 x 50 Watts (Stereo 100 Watts)
Weight (kg): 12.5
Dimensions (mm): 573(W) x 447(H) x 241(D)
Technical Specification
ID:CORE STEREO 150
Power: 2 x 75 Watts (Stereo 150 Watts)
Weight (kg): 14.5
Dimensions (mm): 624(W) x 486(H) x 259(D)
19