Toro Reelmaster 3100-D Service Manual page 115

Removal
WARNING
Before jacking up the machine, review and follow
Jacking Instructions in Chapter 1 − Safety.
1. Remove tire and wheel rim, wheel hub, and brake
drum from the hydraulic motor. Remove brake assem-
bly, brake bracket, and wheel shield from the frame (see
Front Wheel and Brake Removal in Chapter 6 − Wheels,
Brakes, and Miscellaneous).
2. Remove wheel motor from frame using Figure 42 as
guide.
Reelmaster 3100−D
Installation
1. Install wheel motor to frame using Figure 42 as
guide.
2. Install wheel shield, brake bracket, and brake as-
sembly to the frame. Install brake drum, wheel hub, and
tire and wheel rim to the hydraulic motor (see Front
Wheel and Brake Installation in Chapter 6 − Wheels,
Brakes, and Miscellaneous).
Page 4 − 67
Hydraulic System