Hisense AUD-18UX4SGKL Service Manual page 62

6 . C O N T R O L M
6 . C O N T R O L M
remote controller. If the air conditioner has not received a signal from the remote controller when the set
time is up, it will turn off automatically.
3. Neither the turning on nor turning off operation will cancel the timer function。
3.4 Sleep
1. In the heating, cooling or dehumidifying mode, press the "Sleep" button on the remote controller to
start or cancel the sleep function in turn, and at the same time the sleep icon on the display screen will be
on or off accordingly.
2. In the heating mode, the set temperature will decrease automatically after the sleep function is
started.
3. In the cooling mode, the set temperature will rise automatically after the sleep function is started.
4. In default, the setting is to cancel the sleep function. Turning off the unit will also cancel the sleep
function.
3.5 High efficient run function
In Cool, Dehumidification, Fan mode, press the "HIGH POWER " to enter the refrigeration mode, set
the temperature automatically adjust to 18 ; the Fan speed is powerful speed; frequency of high
frequency operation.
In the heating mode, powerful function is invalid for H1 wireless remote controller.
3.6 mute function (only for H1 wireless remote controller)
In the indoor machine operation mode，You may turn on mute function and turn off mute function by
mute key, The air conditioner will run by mute fan speed in mute mode
3.7 prevent cooling wind mode
In the heating-run, to prevent the indoor fan from blowing cold air, the indoor fan will stop or run slowly
until the coil is warmth.
3.8 blow waste heating and waste cooling function
The heating mode, remote shutdown, such as indoor heat exchanger temperature is higher, the wind
blowing out opportunities continue to run the waste heat.
O D E L
O D E L
℃
60