Table 7: Wi-Fi - Grandstream Networks GWN7610 User Manual

Field
Enable Wi-Fi
SSID
SSID Band
SSID Hidden
Wireless Client Limit
Enable Captive Portal
Captive Portal Policy
Security Mode
WEP Key
WPA Key Mode

Table 7: Wi-Fi

Description
Check to enable Wi-Fi for the network group.
Set or modify the SSID name.
Select the Wi-Fi band the GWN will use, three options are available:
•
Dual-Band
•
2.4GHz
•
5Ghz
Select to hide SSID. SSID will not be visible when scanning for Wi-Fi, to
connect a device to hidden SSID, users need to specify SSID name and
authentication password manually.
Configure the limit for wireless client. If there's an SSID per-radio on a
network group, each SSID will have the same limit. So, setting a limit of 50
will limit each SSID to 50 users independently.
If set to 0 the limit is disabled.
Click on the checkbox to enable the captive portal feature.
Select the captive portal policy already created on the "CAPTIVE
PORTAL" web page to be used in the created SSID.
Set the security mode for encryption, 5 options are available:
•
WEP 64-bit: Using a static WEP key. The characters can only be
0-9 or A-F with a length of 10, or printable ASCII characters with a
length of 5.
•
WEP 128-bit: Using a static WEP key. The characters can only be
0-9 or A-F with a length of 26, or printable ASCII characters with a
length of 13.
•
WPA/WPA2: Using "PSK" or "802.1x" as WPA Key Mode, with
"AES" or "AES/TKIP" Encryption Type.
•
WPA2: Using "PSK" or "802.1x" as WPA Key Mode, with "AES" or
"AES/TKIP" Encryption Type. Recommended configuration for
authentication.
•
Open: No password is required. Users will be connected without
authentication. Not recommended for security reasons.
Enter the password key for WEP protection mode.
Select key mode (Pre-Shared Key or 802.1X Authentication).
GWN7610 User Manual
Version 1.0.5.15
P a g e |
38