Access; Syslog; Logserver; Table 15: Access - Grandstream Networks GWN7610 User Manual

Reboot
Download Configuration
Upload Configuration
Upgrade Now
Factory Reset

Access

The Access Web page provides configuration for admin and user password.
Field
Current Administrator
Password
New Administrator
Password
Confirm New
Administrator Password
User Password
User Password
Confirmation

Syslog

The syslog Web page provides configuration settings for syslog.
Field
Syslog Server
Syslog Level

Logserver

The logserver page allows the user to configure syslog server on GWN7610 in order to save log messages
on connected external USB drive.
First connect a USB drive to the Access point, then configure the parameters and make sure to start the
server in order to collect messages from devices sending syslog to GWN. Following table gives description
for configuration parameters of GWN Logserver:
Click on Reboot button to reboot the device
Click on Download to download the device's configuration file.
Click on Upload a device's configuration file.
Click on Upgrade, to launch firmware/config file provisioning. Please make
sure to Save and Apply changes before clicking on Upgrade.
Click on Reset to restore the GWN7610 to factory default settings

Table 15: Access

Description
Enter the current administrator password
Change the current password. This field is case sensitive with a maximum
length of 32 characters.
Enter the new administrator password one more time to confirm.
Configure the password for user-level Web GUI access. This field is case
sensitive with a maximum length of 32 characters.
Enter the new User password again to confirm.

Table 16: Syslog

Description
Enter the IP address or URL of Syslog server.
Select the level of Syslog, 5 levels are available: None, Debug, Info,
Warning and Error. Please reboot the GWN7610 to take effect.
GWN7610 User Manual
Version 1.0.5.15
P a g e |
62