The bandwidth rule is a GWN7610 feature that allows users to limit bandwidth utilization per SSID or client
(MAC address or IP address).
This option can be configured from the GWN7610 WebGUI under "Bandwidth Rules".
Click
to add a new rule, the following table provides an explanation about different options
for bandwidth rules.
Field
Type
SSID
MAC
IP address
Network Group
Upstream Rate
Downstream Rate
The following figure shows an example of MAC address rule limitation.
BANDWIDTH RULES
Table 12: Bandwidth Rules
Description
Choose the type of rule to be applied on bandwidth utilization from the
dropdown list, three options are available:
•
SSID: Set a bandwidth limitation on the SSID level.
•
MAC: Set a bandwidth limitation per MAC address.
•
IP Address: Set a bandwidth limitation per IP address.
Select the SSID to which the limitation will be applied, this option appears
only when SSID type is selected.
Enter the MAC address of the device to which the limitation will be
applied, this option appears only when MAC type is selected.
Enter the IP address of the device to which the limitation will be applied,
this option appears only when IP Address type is selected.
Choose the network group to which belongs the device, this option is
available when choosing either MAC or IP address type.
Specify the limit for the upload bandwidth using Kbps or Mbps.
Specify the limit for the download bandwidth using Kbps or Mbps.
GWN7610 User Manual
Version 1.0.5.15
P a g e
|
59