IDK NJR-T01UHD Command Reference Manual
IDK NJR-T01UHD Command Reference Manual

IDK NJR-T01UHD Command Reference Manual

4k@60 and hdcp2.2 supported hdmi network extender
Hide thumbs Also See for NJR-T01UHD:

Advertisement

Quick Links

4K@60 and HDCP2.2 supported HDMI Network Extender
NJR-T01UHD / NJR-R01UHD
Thank you for choosing this IDK product.
To ensure the best performance of this product, please read this User's Guide fully and carefully
before using it and keep this manual beside this product.
<Command Reference Guide>
IDK Corporation
Ver.2.0.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NJR-T01UHD and is the answer not in the manual?

Questions and answers

Summary of Contents for IDK NJR-T01UHD

  • Page 1 NJR-T01UHD / NJR-R01UHD <Command Reference Guide> Ver.2.0.0  Thank you for choosing this IDK product.  To ensure the best performance of this product, please read this User’s Guide fully and carefully before using it and keep this manual beside this product.
  • Page 2 NJR-T01UHD / NJR-R01UHD Command Guide Trademarks  The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.  All other company and product names mentioned in this manual are either registered trademarks or...
  • Page 3 ● Some of the contents in this command guide such as product appearance in diagrams, menu operations, communication commands, and so on may differ from one NJR-CTB model to another. ● This command guide is subject to change without notice. You can download the latest version from IDK’s website at: http://www.idkav.com...
  • Page 4: Table Of Contents

    NJR-T01UHD / NJR-R01UHD Command Guide Table of Contents How to read this Guide ......................... 5 About this Guide ........................... 6 Communication configuration and Specifications .................. 7 RS-232C communication ......................... 7 3.1.1 Setup of RS-232C communication .................... 7 3.1.2 RS-232C connector specification ....................8 3.1.3...
  • Page 5: How To Read This Guide

    NJR-T01UHD / NJR-R01UHD Command Guide 1 How to read this Guide This guide contains the procedure for commanding NJR-T01UHD and NJR-R01UHD via RS-232C communication or LAN communication. Ch.2 to 4 Product outline, Communication setting and specification, Command PC for control...
  • Page 6: About This Guide

    NJR-T01UHD / NJR-R01UHD Command Guide 2 About this Guide This guide contains the procedure for controlling NJR-T01UHD / NJR-R01UHD using commands via RS-232C communication or LAN communication. ■ Communication commands enables the following main operations: ・Setting input, output, and audio ・Setting EDID...
  • Page 7: Communication Configuration And Specifications

    Command List. 3.1.1 Setup of RS-232C communication Follow the procedure below. (1) Connect the control device to the RS-232C port of the NJR-T01UHD / NJR-R01UHD through an RS-232C cable. (2) Set the DIP switch 1 to “ON”.
  • Page 8: Rs-232C Connector Specification

    NJR-T01UHD / NJR-R01UHD Command Guide 3.1.2 RS-232C connector specification RS-232C pin assignments: Control device RS-232C Pin No. Signal name Signal name connector Cross cable  N.C.   N.C. (No connection)  RD   RD (Received data)  TD   TD (Sent data)  N.C.   N.C. (No connection)...
  • Page 9: Lan Communication

    3.2.1 Setup LAN communication Follow the procedure below. (1) Connect the control device to the LAN port of the NJR-T01UHD / NJR-R01UHD through a LAN cable. (2) Start the IP-NINJAR Configurator in the control device. (3) Send communication command from the Maintenance page of the IP-NINJAR Configurator.
  • Page 10 NJR-T01UHD / NJR-R01UHD Command Guide ① ② ④ ③ ① For entering the desired command. ② For sending the command to NJR-T01UHD or NJR-R01UHD. ③ For displaying the log. ④ For deleting the log. [Figure 3.4] Command input from Maintenance page...
  • Page 11: Lan Port Specification

    LAN port assignment is as follows. Since Auto MDI / MDI-X that distinguishes and switches straight/cross cables automatically is supported, extra care is not necessary to connect the NJR-T01UHD / NJR-R01UHD to PC, HUB or the like. 8-pin RJ-45 module...
  • Page 12: External Control From Njr-Ctb

    NJR-R01UHD (Receiver) The LAN port of NJR-CTB should be connected to the LAN port of NJR-T01UHD / NJR-R01UHD or the 10 GbE switch. PC for control should be connected to the MAINTENANCE port of NJR-CTB or the LAN port of NJR-T01UHD/NJR-R01UHD.
  • Page 13: Connecting Lan Cable

    *A broadcast storm occurs when a network is overwhelmed by continuous broadcast traffic resulting in a network meltdown. During installation, it is important to avoid the creation of network loops. Contact IDK if you require assistance with network implementation.
  • Page 14: Command

    NJR-T01UHD / NJR-R01UHD Command Guide 4 Command 4.1 Summary A command consists of “@” (“40” in hexadecimal), 3 or 4 one-byte alphabetical characters (upper and lower cases) followed by parameters (one-byte numbers). For some commands, multiple parameter values can be specified.
  • Page 15: Command List

    NJR-T01UHD / NJR-R01UHD Command Guide 4.2 Command list ■ Error status Command Function Page @ERR Error status ■ Input settings Command Function Page @GDT / @SDT No-signal-input monitoring @GHE / @SHE HDCP input enabled/disabled ■ Output settings Command Function Page...
  • Page 16 NJR-T01UHD / NJR-R01UHD Command Guide ■ Information Command Function Page @GSS I/O status @GES Monitor’s EDID @GIV Version...
  • Page 17: Setting Items

    NJR-T01UHD / NJR-R01UHD Command Guide 4.3 Setting items Some setting items can be controlled via commands/GUI operation; the others cannot be controlled. [Table 4.1] Available setting method C: Command input, G: GUI operation, W&C: WEB browser and command input, No: Not supported, -: N/A...
  • Page 18: Parameter Input Format

    Parameter input formats are common for each setting. If a command is input from the RS-232C port of NJR-T01UHD / NJR-R01UHD or from the LAN port using the IP-NINJAR Configurator (Software for setting IP-NINJAR), “1” (fixed). is specified to “ch” (channel) because only one NJR-T01UHD / NJR-R01UHD can be controlled.
  • Page 19 NJR-T01UHD / NJR-R01UHD Command Guide Input channel1 Output channel1 Cable for extension NJR-T01UHD (Transmitter) NJR-R01UHD (Receiver) @SAM,2,1,1,1 Input channel64 Output channel64 NJR-T01UHD (Transmitter) NJR-R01UHD (Receiver) 10 GbE switch @SAM,1,64,1,1 LAN cable LAN cable PC for control NJR-CTB [Figure 4.3] Command input from NJR-CTB...
  • Page 20: Details Of Commands

    NJR-T01UHD / NJR-R01UHD Command Guide 4.5 Details of commands 4.5.1 Error status @ERR Error status Format Return value only Return value @ERR, error Parameter error: Error status 1 = Erroneous parameter format or value 2 = Undefined command or wrong format 3 = Currently cannot be used.
  • Page 21: Basic Settings

    Model “1” fixed ch: Input channel 1 to 512 = Input channel1 to Input channel512 If a command is input from the RS-232C port of the NJR-T01UHD or the IP-NINJAR Configurator, “1” is set (fixed). port: Input connector “1” fixed time: No-signal-input monitoring 0 = OFF, 2000 = 2 sec.
  • Page 22 Model “1” fixed ch: Input channel 1 to 512 = Input channel1 to Input channel512 If a command is input from the RS-232C port of the NJR-T01UHD or the IP-NINJAR Configurator, “1” is set (fixed). port: Input connector “1” fixed...
  • Page 23: Output Settings

    1 = NJR-T01UHD, 2 = NJR-R01UHD ch: Channel 1 to 512 = Input channel1 to Input channel512 If a command is input from the RS-232C port of the NJR-T01UHD or the IP-NINJAR Configurator, “1” is set (fixed). reserved: Reservation “1” fixed...
  • Page 24 Model “2” fixed. ch: Channel 1 to 512 = Input channel1 to Input channel512 If a command is input from the RS-232C port of the NJR-T01UHD or the IP-NINJAR Configurator, “1” is set (fixed). reserved: Reservation “1” fixed port: Output connector “1”...
  • Page 25 1 = NJR-T01UHD, 2 = NJR-R01UHD ch: Channel 1 to 512 = Input channel1 to Input channel512 If a command is input from the RS-232C port of the NJR-T01UHD or the IP-NINJAR Configurator, “1” is set (static). reserved: Reservation “1” fixed port: Output connector NJR-T01UHD: “2”...
  • Page 26: Audio Setting

    1 = NJR-T01UHD, 2 = NJR-R01UHD ch: Channel 1 to 512 = Input channel1 to Input channel512 If a command is input from the RS-232C port of the NJR-T01UHD or the IP-NINJAR Configurator, “1” is set (fixed). port: Connector “1” fixed...
  • Page 27 @SAAS,2,1,1,0,1 Setting analog input audio to be output from the analog audio output connector of Channel1. @SAAS,2,1,1,0,1 Completed normally. Remarks The NJR-T01UHD does not support this command. This command can be input only through the command server of the NJR-CTB.
  • Page 28: Edid Setting

    Model “1” static ch: Input channel 1 to 512 = Input channel1 to Input channel512 If a command is input from the RS-232C port of the NJR-T01UHD or the IP-NINJAR Configurator, “1” is set (fixed). port: Input connector “1” fixed...
  • Page 29 Model “1” fixed ch: Input channel 1 to 512 = Input channel1 to Input channel512 If a command is input from the RS-232C port of the NJR-T01UHD or the IP-NINJAR Configurator, “1” is set (fixed). reserved: Reservation “1” fixed number : Destination of the copied data to save “0”...
  • Page 30 Model “1” fixed ch: Input channel 1 to 512 = Input channel1 to Input channel512 If a command is input from the RS-232C port of the NJR-T01UHD or the IP-NINJAR Configurator, “1” is set (fixed). port: Input connector “1” fixed...
  • Page 31 Model “1” fixed ch: Input channel 1 to 512 = Input channel1 to Input channel512 If a command is input from the RS-232C port of the NJR-T01UHD or the IP-NINJAR Configurator, “1” is set (fixed). port: Input connector “1” fixed...
  • Page 32 Model “1” fixed ch: Input channel 1 to 512 = Input channel1 to Input channel512 If a command is input from the RS-232C port of the NJR-T01UHD or the IP-NINJAR Configurator, “1” is set (fixed). port: Input connector “1” fixed...
  • Page 33 NJR-T01UHD / NJR-R01UHD Command Guide @GSP / @SSP Speaker configuration (cont’d) Parameter Getting commands: the number of speakers and which speakers will be used is returned. Setting commands: if you do not specify the speaker configuration, the following configuration will be applied depending on the set number of speakers.
  • Page 34: Rs-232C Setting

    @GCTB, device, ch, reserved, baudrate, @SCTB, device, ch, reserved, baudrate, databit, stopbit, parity databit, stopbit, parity Parameter device: Model 1 = NJR-T01UHD, 2 = NJR-R01UHD ch: Channel 1 to 512 = Input channel1 to Input channel512 reserved: Reservation “1” fixed baudrate: Baud rate...
  • Page 35: Lan Setting

    @GIP, device, ch, reserved, mode, ip, @SIP, device, ch, reserved, mode, ip, mask, gateway mask, gateway Parameter device: Model 1 = NJR-T01UHD, 2 = NJR-R01UHD ch: Channel 1 to 512 = Input channel1 to Input channel512 reserved: Reservation “1” fixed mode: Mode 0 = DHCP [Default], 1 = static After “DHCP”...
  • Page 36 Format @GMC, device, ch, reserved Return value @GMC, device, ch, reserved, mac Parameter device: Model 1 = NJR-T01UHD, 2 = NJR-R01UHD ch: Channel 1 to 512 = Input channel1 to Input channel512 reserved: Reservation “1” fixed mac: MAC address 00 to FF = 8 bits (Hex) x 6 pairs...
  • Page 37: Other Settings

    Format @CLRC, device, ch, reserved Return value @CLRC, device, ch, reserved Parameter device: Model 1 = NJR-T01UHD, 2 = NJR-R01UHD ch: Channel 0 = All channels, 1 to 512 = Input channel1 to Input channel512 reserved: Reservation “1” fixed Example @CLRC,1,2,1 Initializing the settings of NJR-T01UHD Channel2.
  • Page 38: Information

    1 = NJR-T01UHD, 2 = NJR-R01UHD ch: Channel 1 to 512 = Input channel1 to Input channel512 If a command is input from the RS-232C port of the NJR-T01UHD or the IP-NINJAR Configurator, “1” is set (static). port: Input connector / Output connector “1”...
  • Page 39 Linear PCM signal is input, which returns the sampling frequency. COMPRESSED Compressed audio signal (such as Dolby Digital and AUDIO DTS) is input (Because the NJR-T01UHD does not recognize detailed formats, “COMPRESSED AUDIO” is sent to all compressed audios). NO AUDIO NO signal is input.
  • Page 40 No sink device is connected. HDCP is being authenticated. HDCP authentication failed. Example @GSS,1,1,1,0 Getting input statuses of all NJR-T01UHD Chennel1 inputs. ・Input signal type: 30-BIT COLOR HDMI @GSS,1,1,1,0,H30,1920 x 1080p 60Hz, LINEAR PCM 48kHz, HDCP 1.4 ON signal ・Video input signal: 1080P 60Hz...
  • Page 41 1 = NJR-T01UHD, 2 = NJR-R01UHD ch: Output channel 1 to 512 = Output channel1 to Ouputchannel512 If a command is input from the RS-232C port of the NJR-T01UHD or the IP-NINJAR Configurator, “1” is set (fixed). port: Output connector...
  • Page 42 1 = NJR-T01UHD, 2 = NJR-R01UHD ch: Channel 1 to 512 = Input channel1 to Input channel512 If a command is input from the RS-232C port of the NJR-T01UHD or the IP-NINJAR Configurator, “1” is set (static). reserved: Reservation “1” static...
  • Page 43 NJR-T01UHD / NJR-R01UHD Command Guide NJR-01UHD User’s guide (Command Guide) Ver.2.0.0 Revised on: 15 March 2018 Headquarters IDK Corporation 7-9-1 Chuo, Yamato-shi, Kanagawa-pref. 242-0021 JAPAN TEL: +81-46-200-0764 FAX: +81-46-200-0765 Email: idk_eng@idk.co.jp URL: http://www.idkav.com IDK America Inc. 72 Grays Bridge Road Suite 1-C, Brookfield, CT 06804 TEL: +1-203-204-2445 Email: sales@idkav.com URL:...

This manual is also suitable for:

Njr-r01uhd

Table of Contents