Table of Contents
Advertisement
Quick Links
4-channel HDMI Network Extender
NJR-T04HD / NJR-R04HD
<User's Guide>
Ver.1.4.0
● Thank you for choosing our product.
● To ensure the best performance of this product, please read this User's Guide fully and carefully before
using it and keep this manual together with the product for reference as needed.
IDK Corporation
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for IDK NJR-R04HD
Summary of Contents for IDK NJR-R04HD
- Page 1 4-channel HDMI Network Extender NJR-T04HD / NJR-R04HD <User’s Guide> Ver.1.4.0 ● Thank you for choosing our product. ● To ensure the best performance of this product, please read this User’s Guide fully and carefully before using it and keep this manual together with the product for reference as needed.
- Page 2 HDMI Licensing Administrator, Inc. in the United States and other countries. Connection Reset is a registered trademark of IDK Corporation in Japan. All other company and product names mentioned in this manual are either registered trademarks or...
- Page 3 ● Some of the contents in this user’s guide such as the appearance of diagrams, menu operations, communication commands, and so on may differ between products depending on the specific version. ● This Users guide is subject to change without notice. You can download the latest version from IDK’s website at: http://www.idkav.com...
-
Page 4: Safety Instructions
NJR-T04HD / NJR-R04HD User’s Guide Safety Instructions Read and understand all safety and operating instructions before using this product. Follow all instructions and cautions as detailed in this document. Enforcement Symbol Description Indicates the presence of a hazard that may result in death or serious... - Page 5 Do not repair, modify or disassemble. Since the product includes circuitry that uses potentially lethal, high voltage levels, disassembly by unauthorized personnel may lead to the risk of fire or electric shock. For internal inspection or repair, contact your IDK representative.
- Page 6 NJR-T04HD / NJR-R04HD User’s Guide Caution Do not place the product in any place where it will be subjected to high temperatures. If the product is subjected to direct sunlight or high temperatures while under operation, it may affect the product’s performance and reliability and may increase the risk of fire.
-
Page 7: Table Of Contents
Front and Rear Panels.........................16 NJR-T04HD (Transmitter) .......................16 NJR-R04HD (Receiver) ........................18 System Configuration Example ......................20 NJR-T4HD / NJR-R04HD are used as Network Extender ..............20 NJR-T04HD / NJR-R04HD are used as Extender ................21 Precautions and Preparations ......................23 Attaching Rubber feet ........................23 Installation ............................23 Cabling ............................24... - Page 8 NJR-T04HD / NJR-R04HD User’s Guide 10.3.3 HUE ............................60 10.3.4 Saturation ..........................61 10.3.5 Sharpness ..........................61 10.3.6 Gamma ...........................62 10.3.7 Default color ..........................62 10.4 Input setting ............................63 10.4.1 Non-signal input monitoring .....................63 10.4.2 HDCP input Enabled/Disabled ....................64 10.5 Output setting ..........................65 10.5.1 Setting output equalizer ......................65 10.5.2 Setting output mode ........................65...
- Page 9 NJR-T04HD / NJR-R04HD User’s Guide 12 Troubleshooting...........................93...
-
Page 10: How To Read This Manual
NJR-T04HD / NJR-R04HD User’s Guide 1 How to read this manual This User’s Guide contains the basic explanation of the 4-channel HDMI network extender, NJR-T04HD (transmitter) and NJR-R04HD (receiver). Chapter 8 Basic operation Chapter 2 to11 Control PC Control PC... -
Page 11: Included Items
NJR-T04HD / NJR-R04HD User’s Guide 2 Included Items Ensure that all items below are included in the package. If any items are missing or damaged, please contact IDK. NJR-T04HD (Transmitter) NJR-R04HD (Receiver) Cable clamp Rubber feet DIN plug AC cable with lock 3.9 ft. -
Page 12: Precautions For Shipping
NJR-T04HD / NJR-R04HD User’s Guide 3 Precautions for shipping The MM / SM model (NJR -04HD-MM / SM) has an SFP+ module that make it vulnerable to damage caused by mishandling during shipment if it is improperly packaged. If, for any reason, you need to ship the NJR, use the carton and cushion which were used at the time of purchase. -
Page 13: Product Outline
LAN transmission are also supported. The NJR-T04HD / NJR-R04HD can be used as a 4-input and 4-output matrix switcher or distribution system. One NJR-R04HD enables 4-screen videowall and even larger number of screens can be used in a videowall using multiple NJR-R04HDs. -
Page 14: Features
1080p ・ HDCP ・ Extension distance Input (NJR-T04HD) : Up to 98 ft. (30 m) Output (NJR-R04HD) : Up to 164 ft. (50 m) ・ Motion adaptive I/P conversion ・ Matrix switching ・ Distribution to multiple sink devices (NJR-R04HD) ・ Scan conversion ・... - Page 15 NJR-T04HD / NJR-R04HD User’s Guide NJR-T04HD (Transmitter) Scan Video Up to 98 ft. (30 m) Video Input Converter Max. extension distance Receiver Full HD→4K Digital video/audio ４ ４ Ports Multimode fiber (OM3) : 984 ft. (300 m) Inputs HDMI DVI EDID Singlemode fiber (OS1) : 6.21 miles (10 km)
-
Page 16: Front And Rear Panels
Digital optical signal input connector for extension extension A fiber optic cable is used; connects to an optic output connector of NJR-R04HD, other IP-NINJAR’s receiver, or 10 GbE switch. ④ Optic output connector Digital optical signal output connector for extension for extension A fiber optic cable is used;... - Page 17 : Illuminates when video signals are valid; blinks when video signals cannot be transmit correctly. ・TX (blinking) : Blinks when a valid code is being sent to NJR-R04HD, other IP-NINJAR’s receiver, or 10 GbE switch. ・RX (blinking) : Blinks when a valid code is being received from NJR-R04UHD, other IP-NINJAR’s receiver, or 10 GbE...
-
Page 18: Njr-R04Hd (Receiver)
④ ③ ⑬ ⑫ ⑮ ⑭ ⑥ ⑤ [Fig. 6.2] Panel drawing [Table 6.3] Part names and descriptions of NJR-R04HD Number Name Description ① Sync signal input For synchronizing multiple NJR-R04HDs’ output video. connector Connects to the desired NJR-R04HD’s synchronous signal output connector. - Page 19 NJR-T04HD / NJR-R04HD User’s Guide [Table 6.4] Part names and descriptions of NJR-R04HD (Cont’d) Number Name Description ⑦ LAN port For LAN signals ⑧ RS-232C port For RS-232C signals ⑨ DIP switch Switches internal connections of RS-232C signals. 【See: 8.4 Setting】...
-
Page 20: System Configuration Example
7 System Configuration Example This chapter cites two system configuration examples. 7.1 NJR-T4HD / NJR-R04HD are used as Network Extender Using NJR-T01UHDs / NJR-R01UHDs or IP-NINJAR transmitters/receivers with a 10 GbE switch enables extending, distributing, matrix switching, videowall, and multiviewer. -
Page 21: Njr-T04Hd / Njr-R04Hd Are Used As Extender
① Video and audio signals are input from the Blu-ray disc player to the HDMI input connector of NJR-T01UHD / NJR-T04HD. ② NJR-T01UHD / NJR-T04HD sends these signals to NJR-R01UHD / NJR-R04HD over a fiber optic cable. ③ NJR-R01UHD / NJR-R04HD outputs received video and audio signals from the HDMI output connector to the monitor. - Page 22 NJR-T04HD / NJR-R04HD User’s Guide Videowall using NJR-T01UHD and NJR-R04HD Up to HDMI / DVI 16.4 ft./50 m ③ ③ ③ 1080p ×4 Monitor NJR-T01UHD NJR-R04HD Up to HDMI / DVI (Transmitter) (Receiver) 1.64 ft./5 m ③ Maximum extension: 4K@60 ①...
-
Page 23: Precautions And Preparations
Before using the NJR-T04HD / NJR-R04HD, follow the precautions and instructions below. 8.1 Attaching Rubber feet First, clean the bottom surface of the NJR-T04HD / NJR-R04HD as needed, and then peal the release papers from the rubber feet and place them in each of the four corners. -
Page 24: Cabling
Follow the precautions below when connecting the NJR-T04HD / NJR-R04HD to target devices. ・Read the user’s guides of connected devices carefully. ・When connecting a cable to the NJR-T04HD / NJR-R04HD or a compatible product, dissipate static electricity by touching grounded metal such as racks before handling single cables. Failure to observe this precaution may result in ESD (electrostatic discharge) damage. -
Page 25: Fiber Optic Cable
NJR-T04HD / NJR-R04HD User’s Guide 8.3.2 Fiber optic cable NJR-T04HD / NJR-R04HD can reach their full potential by selecting appropriate fiber optic cables and installing the cable correctly. ・ Connect the output connector of this device to the input connector of the target device. -
Page 26: Sfp+Module
・ Before inserting a fiber optic cable, make sure there is no damage or dirt on the end-face of the optical connector. Clean up it or NJR-T04HD/NJR-R04HD may not operate correctly. Left: without dust cap Before cleaning... -
Page 27: Connecting Rs-232C
（Not used） N.C. N.C. N.C.：No Connection [Fig. 8.7] RS-232C pin assignment (connecting to PC) ■ Connecting NJR-04UHD to IDK’s products Use a cross cable to connect the NJR-04UHD to an IDK’s product. NJR-04UHD IDK’s products Pin # Signal Signal （Not used）... - Page 28 NJR-T04HD / NJR-R04HD User’s Guide ■ Connecting NJR-04UHD to another device requiring straight connection Use a straight cable to connect the NJR-04UHD to other devices requesting straight connection. NJR-01UHD Other devices Pin # Signal Signal （Not used） N.C. N.C.
-
Page 29: Connecting Lan Cable
N.C.: No Connection [Fig. 8.10] LAN connector specification Make sure not to form a loop by NJR-T04HD / NJR-R04HD when connecting a LAN cable to NJR-T04HD / NJR-R04HD. NJR-T04HD / NJR-R01UHD constantly send broadcast packet in order to notify status. -
Page 30: Din Plug Ac Adapter With Lock
NJR-T04HD / NJR-R04HD User’s Guide 8.3.6 DIN plug AC adapter with lock ■ Plugging and unplugging DC plug Plug the DC plug to the power supply connector of the unit until it clicks. Hold the portion mentioned below when unplugging the DC plug. -
Page 31: Setting Dip Switch
NJR-T04HD / NJR-R04HD User’s Guide 8.4 Setting DIP switch Use the DIP switch to change settings of NJR-T04HD / NJR-R04HD. NJR-T04HD (Transmitter) NJR-R04HD (Receiver) Scan Scan Video Video HDMI converter converter HDMI receiver Audio Audio transmitter EDID emulator Projector Blu-ray player... -
Page 32: Basic Operation
NJR-T04HD / NJR-R04HD User’s Guide 9 Basic Operation NJR-T04HD / NJR-R04HD can be set from commands over RS-232C communication and NJR-CTB (control box for IP-NINJAR) or IP-NINJAR Configurator. PC for control PC for control PC for control (Communication (Communication (IP-NINJAR Configurator) -
Page 33: Control Over Rs-232C Communication
9.1 Control over RS-232C communication The NJR-T04HD / NJR-R04HD can be controlled over RS-232C communication. You can control the NJR-T04HD or NJR-R04HD and get its status by connecting a control unit, such as PCs, to the NJR-T04HD or NJR-R04HD over an RS-232C cable. -
Page 34: Ip-Ninjar Configurator
NJR-T04HD / NJR-R04HD User’s Guide 9.2 IP-NINJAR Configurator The NJR-T04HD / NJR-R04HD connected to LAN can be set from the IP-NINJAR Configurator remotely over LAN communication. The following settings can be set from the GUI: setting RS-232C, setting LAN, resetting settings, and rebooting the NJR-T04HD / NJR-R04HD. -
Page 35: Control Over Njr-Ctb (Control Box For Ip-Ninjar)
WEB browser or LAN by connecting to NJR-T04HD / NJR-R04HD or 10 GbE switch. Refer to NJR-CTB User’s Guide for operations via a web browser. Refer to the Command Guide for NJR-T04HD / NJR-R04HD or the Command Guide for NJR-CTB for details of communication commands. -
Page 36: Setting Items
NJR-T04HD / NJR-R04HD User’s Guide 9.4 Setting Items Some setting items can be controlled through commands/GUI operation; the others cannot be controlled. [Table 9.1] Setting items C: Command input, G: GUI, W: WEB browser and command input, No: Not supported... - Page 37 Selecting I/O channel* Setting NJR-CTB LAN* * In this manual, only settings of NJR-T04HD / NJR-R04HD are explained. Refer to NJR-CTB User’s Guide for the following operations: Using as Network Extender base on 10GbE Switcher, setting channel information, selecting input/output channel, operating preset memory, setting video wall, setting cross...
-
Page 38: Setting
The following items of NJR-T04HD / NJR-R04HD can be set using the RS-232C communication, IP-NINJAR Configurator, or NJR-CTB. In this manual, only settings of NJR-T04HD / NJR-R04HD are explained. Refer to NJR-CTB User’s Guide for the following operations: Using as Network Extender base on 10GbE Switcher, setting channel information, selecting input/output channel, operating preset memory, setting video wall, setting cross point, and setting NJR-CTB LAN. - Page 39 NJR-T04HD / NJR-R04HD User’s Guide [Table 10.2] Setting items (Cont’d) Setting value Setting item Page Value Default [NJR-T04HD] 1920÷4 to 1920×4 1920 “Video type” is set to “All Inputs”. [NJR-T04HD] Horizontal input resolution÷4 to Horizontal input “Video type” is set to Horizontal input resolution×4...
- Page 40 NJR-T04HD / NJR-R04HD User’s Guide [Table 10.3] Setting items (Cont’d) Setting value Setting item Page Value Default [NJR-T04HD] Vertical display position (0 or more) to Bottom masking [NJR-R04HD] Vertical display position (0 or more) to “Videowall enabled / Bottom masking disabled and coordinate grid”...
- Page 41 NJR-T04HD / NJR-R04HD User’s Guide [Table 10.4] Setting items (Cont’d) Setting value Setting item Page Value Default “Frame delay” is set Horizontal / Vertical: 1 to 2 Horizontal / to ”Normal mode” Vertical: 2 “Frame delay” is set Horizontal / Vertical: 1 to 5 Horizontal / to “Expand mode”...
- Page 42 NJR-T04HD / NJR-R04HD User’s Guide [Table 10.5] Setting items (Cont’d) Setting value Setting item Page Value Default Deep Color 24-BIT COLOR / 30-BIT COLOR 24-BIT COLOR Video type All Inputs / IN1 / IN2 / IN3 / IN4 All Inputs...
- Page 43 NJR-T04HD / NJR-R04HD User’s Guide [Table 10.6] Setting items (Cont’d) Setting value Setting item Page Value Default Lip sync 0 ms to 160 ms 0 ms Test tone Test tone ON / OFF:OFF / ON Test tone level: -20 dBFS / ±0...
-
Page 44: Input Signal Automatic Detection
NJR-T04HD / NJR-R04HD User’s Guide 10.1 Input signal automatic detection NJR-T04HD The NJR-T04HD continuously monitors its input signals. If a particular signal has previously been connected to the NJR’s input, the output signal will be presented in the same format as it was during the most recent session. -
Page 45: Setting Position, Size, And Masking
NJR-T04HD / NJR-R04HD User’s Guide 10.2 Setting position, size, and masking 10.2.1 Output resolution NJR-R04HD If you set this attribute to “AUTO”, the optimal resolution will be selected automatically. Numbers following “@” represent the vertical sync frequency. 480i / 480p / 576i / 576p / 720p / 1080i / 1080p are timing formats relating to the CEA-861 standard. -
Page 46: Aspect Ratio For Sink Device
NJR-T04HD / NJR-R04HD User’s Guide 10.2.2 Aspect ratio for sink device NJR-R04HD You can set the aspect ratio of the connected sink device. If you select “RESOLUTION,” the aspect ratio of the resolution selected in “Output resolution” will be applied. -
Page 47: Aspect Ratio
NJR-T04HD / NJR-R04HD User’s Guide 10.2.3 Aspect ratio NJR-T04HD You can set the aspect ratio for each video input. If you select “AUTO-1” or “AUTO-2,” the aspect ratio is restored automatically to the original ratio according to the input signal. -
Page 48: Overscan
NJR-T04HD / NJR-R04HD User’s Guide 10.2.4 Overscan NJR-T04HD You can create an enlarged display of input video. Setting for For each HDMI input connector, each input signal If “10.11.1 Devices to be connected” is set to “NJR-T01UHD or NJR-R01UHD is included” or “10.5.7 Video type”... -
Page 49: Display Position
“10.11.1 Devices to be connected” is set to “NJR-T01UHD or NJR-R01UHD is included” or “10.5.7 Video type“ is set to “All Inputs”, @SNP communication command cannot be used. NJR-R04HD: For each HDMI output connector Settings for when videowall is enabled and for when videowall is disabled can be kept individually. -
Page 50: Setting Display Size
“10.5.7 Video type” is set to “All Inputs”, @SNS communication command cannot be used. NJR-R04HD: For each HDMI output connector For outputs whose “10.2.12 Videowall enabled / disabled and coordinate grid” is set to “Enabled”, the setting of OUT1 will be applied. -
Page 51: Masking
If “10.11.1 Devices to be connected” is set to “NJR-T01UHD or NJR-R01UHD is included”, or “10.5.7 Video type” is set to “All Inputs”, @SNM communication command cannot be used. NJR-R04HD: For each HDMI output connector Settings for when videowall is enabled and for when videowall is disabled can be kept individually. - Page 52 NJR-T04HD / NJR-R04HD User’s Guide Top masking [Table 10.14] Top masking Model 10.5.7 Video type Set value Default NJR-T04HD All Inputs / IN1 to IN4 Vertical display position (0 or more) to Making (Bottom) Model 10.2.12 Videowall enabled / Set value...
-
Page 53: Automatic Sizing
The setting command cannot be used if “10.11.1 Devices to be connected” is set to “NJR-T01UHD or NJR-R01UHD is included” and “10.5.7 Video type” is set to “All Inputs”. NJR-R04HD: For each HDMI output connector Communication command @IAS Automatic sizing 10.2.9 Background color... -
Page 54: Test Pattern
STRIPE [Fig. 10.3] Test pattern Setting for NJR-T04HD: If “10.5.7 Video type” is set to “All Inputs”, @STP communication command cannot be used. NJR-R04HD: For each HDMI output connector Setting value [Fig. 10.3] Test pattern Communication command @STP Setting test pattern... -
Page 55: Videowall Screen Number
NJR-T04HD / NJR-R04HD User’s Guide 10.2.11 Videowall screen number NJR-R04HD You can set the number of screens that display a video signal simultaneously. Once this menu is changed, the videowall coordinate grid will be changed automatically as follows and the settings of “10.2.5 Display position”, “10.2.6 Setting display size”, “10.2.7 Masking”, “10.5.10 Frame delay”... -
Page 56: Videowall Enabled / Disabled And Coordinate Grid
NJR-T04HD / NJR-R04HD User’s Guide 10.2.12 Videowall enabled / disabled and coordinate grid NJR-R04HD You can enable / disable videowall and set horizontal / vertical coordinate points. Once this menu is changed, the settings of “10.2.5 Display position”, “10.2.6 Setting display size”, “10.2.7 Masking”, “10.5.10 Frame delay”... -
Page 57: Bezel
NJR-T04HD / NJR-R04HD User’s Guide Setting value [Table 10.18] Videowall setting Item Setting value Default Videowall with video other than Disabled / Enabled Enabled Videowall with 4K video from Disabled / Enabled Disabled NJR-T04HD Videowall with 4K video from Disabled / Enabled... -
Page 58: Frame Delay
NJR-R04HD You can set the frame delay mode when videowall is enabled. Normal mode: 1 NJR-R04HD supports up to 2×2. When moving image is displayed on multiple monitors, time lag occurs between upper and lower monitors. In order to prevent this problem, the NJR outputs video to the lower monitors 1 frame later than the upper monitors. -
Page 59: Quality Setting
IN1 to IN4 Can be set for all inputs. NJR-R01UHD is included If the setting of “10.11.1 Devices to be connected” is changed from “Only NJR-T04HD and NJR-R04HD” to “NJR-T01UHD or NJR-R01UHD is included”, this setting will be initialized. 10.3.1 Brightness NJR-T04HD / NJR-R04HD You can set the brightness level. -
Page 60: Contrast
You can set the contrast of video image. Setting for NJR-T04HD: See “[Table 10.19] Setting for NJR-T04HD”. NJR-R04HD: For each HDMI output connector Setting value R / G / B: 0% to 200% [Default] R / G / B: 100%... -
Page 61: Saturation
Setting for NJR-T04HD: See “[Table 10.19] Setting for NJR-T04HD”. NJR-R04HD: For each HDMI output connector The OUT1’s setting will be will be applied to all four outputs if “10.11.1 Devices to be connected” is set to “NJR-T01UHD or NJR-R01UHD is included” and “10.5.7 Video type”... -
Page 62: Gamma
10.3.6 Gamma NJR-T04HD / NJR-R04HD You can set the gamma curve. Setting for NJR-T04HD: See “[Table 10.19] Setting for NJR-T04HD”. NJR-R04HD: For each HDMI output connector Setting value 0.1 to 3.0 [Default] 1.0 Communication command @SGM Setting gamma @GGM Getting gamma 10.3.7 Default color... -
Page 63: Input Setting
NJR-T04HD / NJR-R04HD User’s Guide 10.4 Input setting 10.4.1 Non-signal input monitoring NJR-T04HD If EDID of the NJR-T04HD is changed or it is turned ON/OFF, the source device may not output video signal. In this case, you can set the time length which is from when a source device stops outputting signal to when the NJR-T04HD requests the source device to output video signal. -
Page 64: Hdcp Input Enabled/Disabled
NJR-T04HD / NJR-R04HD User’s Guide 10.4.2 HDCP input Enabled/Disabled NJR-T04HD You can set whether NJR-T04HD supports HDCP to the source device. Some source devices check whether the connected device supports HDCP and then determine whether they encrypt HDCP signal or not. Since NJR-T04HD is HDCP compliant, if it is connected to a sink device that is not HDCP compliant, the sink device may not display video. -
Page 65: Output Setting
NJR-T04HD / NJR-R04HD User’s Guide 10.5 Output setting 10.5.1 Setting output equalizer NJR-R04HD You can set the output equalizer. Setting for For each HDMI output connector Setting value OFF [Default] MIDDLE HIGH Communication command @SEQ Setting output equalizer @GEQ Getting output equalizer 10.5.2 Setting output mode... -
Page 66: Hdcp Re-Authentication
NJR-T04HD / NJR-R04HD User’s Guide 10.5.3 HDCP re-authentication NJR-R04HD If a sink device supporting HDCP is connected, HDCP is authorized automatically (NJR-R04HD). You can re-authorize HDCP manually using this menu. Setting for For each HDMI output connector Communication command @HAU HDCP re-authentication 10.5.4 Synchronous signal output for when no input video... -
Page 67: Output Video For When No Input Video
If “10.5.4 Synchronous signal output for when no input video” is set to “OFF”, synchronous signal is not output. Setting for NJR-T04HD: “10.5.7 Video type” is set to “All Inputs”, @SBO cannot be used and black is output. NJR-R04HD: For each HDMI output connector Setting value Black Blue [Default]... -
Page 68: Video Type
NJR-T04HD / NJR-R04HD User’s Guide 10.5.7 Video type NJR-T04HD You can set the video that is output from NJR-T04HD. When “10.11.1 Devices to be connected” is set to “NJR-T01UHD or NJR-R01UHD is included” and “10.5.7 Video type” is set to “All Inputs”, the following settings will be initialized. - Page 69 NJR-T04HD / NJR-R04HD User’s Guide If “All Inputs” is selected, output audio (each 2-channel audio from IN1 to IN4 or an 8-channel audio from one of IN1 to IN4) will be set according to the setting of “10.6.3 Audio input for combining 4K”.
-
Page 70: Matrix Switch
NJR-T04HD / NJR-R04HD NJR-T04HD: Sets where the four input video will be displayed on the combined 4K video. NJR-R04HD: Divides one 4K video into four full HD video and sets HDMI output connectors that each full HD video will be output to. -
Page 71: Frame Delay
NJR-T04HD / NJR-R04HD User’s Guide 10.5.10 Frame delay NJR-R04HD Time lag occurring between upper and lower monitors can be avoided by setting “10.2.14 Frame delay” to “Normal mode”. If “10.2.14 Frame delay” is set to “Expand mode” and videowall is enabled, set this menu of all outputs to the same value (1-fram latency or 2-frame delay). -
Page 72: Audio Setting
10.6.1 Muting digital audio NJR-T04HD / NJR-R04HD You can enable or disable the audio output mute. Once you mute NJR-T04HD, all audio of NJR-R04HD connected through the 10 GbE switch can be muted. Setting for NJR-T04HD: For each HDMI input connector... -
Page 73: Audio Input For Combining 4K
NJR-T04HD / NJR-R04HD User’s Guide 10.6.3 Audio input for combining 4K NJR-T04HD You can select the audio that is output from NJR-T04HD. Setting for If “10.5.7 Video type” is set to “IN1” to ”IN4”, @SAS cannot be used. Setting value... -
Page 74: Lip Sync
NJR-T04HD / NJR-R04HD User’s Guide 10.6.4 Lip sync NJR-R04HD You can adjust the gap between video (motion) and audio (sound). Setting for Each input number The setting of Input number1 will be applied in the following conditions. ・ If the NJR-T01UHD is used as the transmitter, the amount of gap will be the same for 4 ports. -
Page 75: Test Tone
Since test tone can be output only to specific speakers, you can check the positions and connections of the speakers. You can also set test tone level and frequency. Setting for NJR-T04HD: N/A NJR-R04HD: Test tone ON / OFF can be set only for each HDMI output connector individually. Setting value Test tone ON / OFF: OFF [Default]... -
Page 76: Edid Setting
NJR-T04HD / NJR-R04HD User’s Guide 10.7 EDID setting 10.7.1 Setting EDID resolution NJR-T04HD You can set the desired resolution that is output from the source device. Setting for For each HDMI input connector Setting value [Table 10.23] EDID maximum resolution Max. - Page 77 NJR-T04HD / NJR-R04HD User’s Guide [Table 10.24] Supported resolution Y: Supported; N: Not supported Resolution Maximum resolution 1080p (50 / 59.94 / 60) 720p (50 / 59.94 / 60) 1080i (50 / 59.94 / 60) 800x600 1024x768 1280x768 1280x800 1280x960...
-
Page 78: Selecting Wxga Mode
NJR-T04HD / NJR-R04HD User’s Guide 10.7.2 Selecting WXGA mode NJR-T04HD You can set the WXGA pixel (1360x768 or 1366x768) depending on the resolution of EDID. Setting for For each HDMI input connector Setting value 1360x768 [Default] 1366x768 Communication command @SWX Setting WXGA mode... -
Page 79: Telop
NJR-T04HD / NJR-R04HD User’s Guide 10.8 Telop 10.8.1 Enabling / Disabling telop NJR-R04HD You enable / disable telop that displays output and input numbers. Setting for For each HDMI output connector Setting value Output number: OFF [Default] Input number: OFF [Default]... -
Page 80: Telop Font Color
NJR-T04HD / NJR-R04HD User’s Guide 10.8.3 Telop font color NJR-R04HD You can set the telop background color. Setting for For each HDMI output connector Setting value R / G / B: 0 to 255 [Default] R / G / B: 255 (White) -
Page 81: Telop Position
NJR-T04HD / NJR-R04HD User’s Guide 10.8.5 Telop position NJR-R04HD You can set the telop position. Setting for For each HDMI output connector Setting value TOP-LEFT [Default] TOP-CENTER TOP-RIGHT BOTTOM-LEFT BOTTOM-CENTER BOTTOM-RIGHT Communication command @STA Setting telop position @GTA Getting telop position 10.8.6 Telop text... -
Page 82: Rs-232C Setting
NJR-T04HD / NJR-R04HD. Note: The RS-232C port is used for two modes: controlling NJR-T04HD or NJR-R04HD and communicating between devices that connected to NJR-T04HD / NJR-R04HD. For the latter mode, set the DIP switch (No.1) to “OFF”. 【See: 8.4 Setting】... - Page 83 NJR-T04HD / NJR-R04HD User’s Guide Setting value [Table 10.25] Setting items for RS-232C communication Setting item Setting value Default value Baud rate [bps] 4800,9600,19200,38400,57600,115200 9600 Data bit length [bit] Stop bit [bit] Parity check NONE, ODD, EVEN NONE Communication command...
-
Page 84: Lan Setting
NJR-T04HD / NJR-R04HD User’s Guide 10.10 LAN setting 10.10.1 LAN NJR-T04HD / NJR-R04HD The IP address can be obtained automatically by DHCP (Dynamic Host Configuration Protocol). Static IP address, subnet mask, and default gateway can also be configured manually. Setting value [Table 10.26] Setting items of LAN communication... -
Page 85: Others
NJR-T04HD / NJR-R04HD User’s Guide 10.11 Others 10.11.1 Devices to be connected NJR-T04HD / NJR-R04HD You can select devices to be connected. If multiple NJR series products are connected via a network switch, you do not need to set this menu because the NJR-CTB automatically set devices to be connected. -
Page 86: Reboot
NJR-T04HD / NJR-R04HD User’s Guide 10.11.3 Reboot NJR-T04HD / NJR-R04HD You can reboot the NJR using IP-NINJAR Configurator or NJR-CTB over LAN communication. Communication command @RBTC Reboot 【See: 9.2 IP-NINJAR Configurator 】 【See: 9.3 Control over NJR-CTB (Control box for IP-NINJAR) 】... -
Page 87: Information
NJR-T04HD / NJR-R04HD User’s Guide 10.12 Information 10.12.1 Input status NJR-T04HD You can display the signal status that is input from the HDMI input connector. Setting for For each HDMI input connector Information to be displayed [Table 10.28] Input signals... -
Page 88: Output Status
NJR-T04HD / NJR-R04HD User’s Guide Communication command @GSS Getting I/O status 10.12.2 Output status NJR-R04HD You can display the status of the sink device connected to the HDMI output connector. Setting for For each HDMI output connector Information to be displayed [Table 10.32] HDCP authentication... - Page 89 NJR-T04HD / NJR-R04HD User’s Guide [Table 10.34] Error code HDMI output connector status of video output is displayed and then the status of audio output is displayed. Value to be Video output Audio output displayed Video is output correctly. Audio is output correctly.
-
Page 90: Monitor Edid
NJR-T04HD / NJR-R04HD User’s Guide 10.12.3 Monitor EDID NJR-R04HD You can display the EDID of the sink device connected to the HDMI output connector. Setting for For each HDMI output connector Information to be displayed [Table 10.35] Monitor’s EDID Displayed value... -
Page 91: Displaying Version
NJR-T04HD / NJR-R04HD User’s Guide 10.12.4 Displaying version NJR-T04HD / NJR-R04HD You can display the model number (NJR-T04HD or NJR-R04HD) and firmware version. Information to be displayed [Table 10.36] Version Item Example Model number NJR-T04HD Firmware version 1.10 Communication command... -
Page 92: Product Specification
8-channel audio is supported when only 1 audio input channel is transmitted. The value of the maximum extension distance was obtained when IDK’s cable (AWG 24) was used and 1080p@60 24 bit / pixel (8 bit / component) signals were transmitted. -
Page 93: Troubleshooting
NJR-T04HD / NJR-R04HD User’s Guide 12 Troubleshooting In case the NJR-T04HD / NJR-R04HD does not work correctly, please check the following items first. Also refer to manuals for connected devices as well, since they may possibly be the cause of the problem. - Page 94 NJR-T04HD / NJR-R04HD User’s Guide User’s Guide of NJR-T04HD / NJR-R04HD Ver.1.4.0 Issued on: 12 June 2018 Headquarters IDK Corporation 7-9-1 Chuo, Yamato-shi, Kanagawa-pref. 242-0021 JAPAN TEL: +81-46-200-0764 FAX: +81-46-200-0765 Email: idk_eng@idk.co.jp URL: http://www.idkav.com IDK America Inc. 72 Grays Bridge Road Suite 1-C, Brookfield, CT 06804 TEL: +1-203-204-2445 Email: sales@idkav.com URL:...
Need help?
Do you have a question about the NJR-R04HD and is the answer not in the manual?
Questions and answers