Absen N4 User Manual page 15

Leading LED Applications
Step 2:
Take a properly spliced cabinet, remove modules
from four corners, mark installation positions on the
wall according to the mounting holes on the
sub-frame.
Step 4:
Install the cabinet: Mount cabinets onto the wall
corresponding to the M10 expansion screw positions,
and then lock M10 nut (flat cushion + spring washers)
M10 nut (flat cushion
+ spring washers)
N Series User Manual
Step 3:
According to the installation positions marked on
the wall, install M10 expansion screws.
Sub-frame
M10 Expansion
screws
Module
Installation
hole
Mark
Step 5:
After wiring is completed, insert modules back at
the four empty corners. Repeat the same proce-
dures to install the next spliced cabinet.
Cabinet installation is completed with sub-frame
Wall
- 14 -