Vented Drying Cycle - Indesit ISL70CNL Service Manual

2.2 VENTED DRYINg CYCLE AND CIRCULATION Of AIR - STEAM - wATER (ELECTROMEChANICAL)
1
2
9
11
Service Manual
Yate Production Dryers
3
1 Filter and steam outlet from drum
2 Steam venting duct
3 Cold air inlet
4 Holes admitting hot air to drum at rear
Heating elements
5
6 Vent outlet and connection for external duct
7 Motor
8 Fan blowing cold air onto heating elements
Fan and heater guard
9
4
10 Steam outlet
11 Motor reversing unit. Direction of rotation chan-
ges every 150 seconds approx (ARISTON dryers
only).
12 Fan by which outside air is drawn in and blown
onto heating elements.
5
The motor drives both the fan and the drum, alterna-
ting the direction of rotation at set intervals which are
programmed electronically or timed electromechani-
cally; when the drum rotates counterclockwise, the
6
heating elements are deactivated.
Air drawn in from the outside is blown through the
7 heating elements and into the drum, entering by way
8
of the rear holes.
The forced air, heated, penetrates the damp fabrics
and converts the moisture to steam. From here, the
steam passes through a filter located in the bottom
part of the door seal and is vented to the atmosphere
by way of a duct.
10
Edition
2006.09.21
E
12
Language
English
n
4