Red-D-Arc DC-600 Operator's Manual page 39

E-11
Observe Safety Guidelines
detailed in the beginning of this manual.
PROBLEMS
(SYMPTOMS)
Poor arc characteristics in all
processes.
If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your
Local Authorized Field Service Facility for technical troubleshooting assistance before you proceed.
TROUBLESHOOTING
POSSIBLE AREAS OF
MISADJUSTMENT(S)
WELDING PROBLEMS
1. Check for the correct input volt-
ages on the three- phase input
lines at the DC600.
2. Make sure the proper welding
procedures are
used.(wire feed speed, arc volt-
age and wire size).
3. Check the welding cables for
loose or faulty connections.
CAUTION
DC-600
TROUBLESHOOTING GUIDE
RECOMMENDED
COURSE OF ACTION
If all recommended possible areas
of misadjustment have been
checked and the problem persists,
Contact your local Authorized
being
Field Service Facility.
E-11