Using The Printer; Printing The Current Test Results; Specifying Automatic Printing Of Results; Changing The Serial Port Baud Rate And Parity - Accriva Diagnostic AVOXimeter 4000 Operator's Manual

AVOXimeter 4000 Operator's Manual

Using the Printer

An optional printer can be connected by means of the serial port at the rear of the instrument (see
page 14).
Note: Contact your Accriva representative to purchase the optional printer.

Printing the Current Test Results

1.

Specifying Automatic Printing of Results

The instrument can be configured so that results are automatically printed at the end of a test.
1.
2.
3.
4.

Changing the Serial Port Baud Rate and Parity

If a computer is being connected to the AVOXimeter 4000, the baud rate and parity of the serial
port on the instrument may need to be changed to optimize communication.
1.
2.
3.
4.
5.
6.
36
When the test results are displayed on the screen, press
Display the "Printer Mode" menu (a submenu of
Press followed by
Press followed by
Mode" menu is again displayed.
Press to return to the previous menu, if desired.
Display the "Printer Mode" menu (a submenu of
Press followed by
Press and/or to change the baud rate. When the correct value is
displayed, press
Press and/or to toggle between "NONE," "ODD," and "EVEN." When the
correct value is displayed, press
Press to confirm the new values. The "Printer Mode" menu is again displayed.
Press to return to the previous menu, if desired.
to display the automatic printing screen:
. A confirmation prompt is displayed, and the "Printer
to display the port parameters:
to advance the cursor to the "Parity" field.
.
.
, see page 12).
, see page 12).