Accriva Diagnostic AVOXimeter 4000 Operator's Manual page 35

4. The screen for specifying the sample type is displayed:
5. Press followed by
6. If optional entry of Patient IDs is enabled (see page 28), the screen for entering a
Patient ID is displayed:
Note:
To bypass entry of a Patient ID, press
●
If the Patient ID that was previously entered during the current session is to
be used, press
●
If a new Patient ID is to be entered, press
screen for entering a Patient ID is displayed:
Enter the Patient ID, then press
displayed, press
7. Test results are displayed within ten seconds:
The oxygen content (O
Note:
the test record. The (O
the stored data record, but is not displayed.
8. Holding the cuvette by the finger grip on the black cap, remove the cuvette from
the test chamber.
AVOXimeter 4000 Operator's Manual
.
followed by . A confirmation screen is displayed.
. When the confirmation screen is
followed by .
Ct) of the sample is calculated and included in
2
Ct) result is included in the results printout and in
2
.
followed by . The
35