Setting The Standby Delay - Accriva Diagnostic AVOXimeter 4000 Operator's Manual

AVOXimeter 4000 Operator's Manual
4.
5.
6.

Setting the Standby Delay

The instrument enters a low-power Standby mode after being inactive for a specified length of
time (the Standby Delay). The instrument is factory preset for a standby delay time of 60 minutes,
but a time of 10 to 180 minutes can be specified.
1.
2.
3.
4.
5.
6.
22
Use the number keys to enter the new date, then press
displayed.
Press followed by
displayed.
Press to return to the previous menu, if desired.
Display the "Device Settings" menu (a submenu of
Press followed by
factory default value):
Press followed by
Use the number keys to enter the new standby delay (or disable the standby
delay), then press
Press followed by
Press to return to the previous menu, if desired.
. The "Time, Date, and Battery" menu is again
to display the standby delay (60 minutes is the
to display the screen for changing the standby delay:
. The new standby delay is displayed.
. The "Device Settings" menu is again displayed.
. The new date is
, see page 12).