Stopping - TOHATSU MFS2.5B Owner's Manual

30
ENGINE OPERATION
ENOW00057-0
CAUTION
Do not tilt up outboard motor while engine
operates, or no cooling water may be fed,
leading to engine seizure due to overheat-
ing.
ENON00213-0
Note
Slow down to trolling speed, and shift into
neutral before setting outboard motor to
shallow water drive position.
ENON00206-0
Note
Idle speed may be higher during warming
up of engine. If shifted to Forward during
warming up, it may be difficult to shift back
to neutral. In such case, stop engine, shift to
neutral, and restart engine to warm up.
ENON00207-0
Note
Frequent shifting to forward can accelerate
wear or degradation of parts. In such case,
replace gear oil earlier than the period spec-
ified.
ENOM00220-0

6. Stopping

1. Turn the throttle grip to the low speed
position.
2. Set the shift lever to the Neutral (N)
position. After high-speed operation,
continue idling for 2 to 3 minutes.
3. Continue pressing the stop switch until
the motor stops. Or pull the stop
switch lock out.
4. Close the fuel cock.
5. Tighten the air vent screw of the tank
cap.
ENOW00203-0
WARNING
Avoid serious injury or death from a gaso-
line fire or explosion.
Ensure that is 4 and 5.
1
1. Shift lever
2. Stop switch
3. Stop switch lock
4. Hook
1
1. Fuel cock
2. Air vent screw
2
3
4
ENOF00226-0
2
ENOF00227-0
1
ENOF00228-0