Select whether to inhibit automatic delivery tray replacement while running jobs with an inner two-way tray mounted in position. Select "Enable" to inhibit auto-

matic tray replacement.

Detailed Discussions of Bit 1

iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i

Select whether to halt stapling job when a finisher installed has run out of staples. Select "Enable" to halt staple jobs when the finisher has run out of staples.

Detailed Discussions of Bit 2

iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i

Select whether to display a tray full message when the maximum allowable stapled document count is exceeded with a finisher installed. Select "Enable" not to

display the message.

Detailed Discussions of Bit 3

iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i

Select whether split recording is to be enabled when text data such as a header and body text is recorded. Selecting "Set" may split text data when a small paper size

such as A5 is selected. In this case, a page may be split in the middle of a character string.

5.1.5.1.4 SSSW-SW18

List of Functions

iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i

Bit

Detailed Discussions of Bit 0

iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i

If there is no progress after shifting the target figure of the temperature adjustment using "Temperature Adjustment UP/DOWN Mode", # PRINTER> Numeric>

Function

Halt stapling job when out of staples

Inhibit tray full indication while the stapled document

count is exceeded

IFAX Permission of split recording of text data

Not used

Function

Limit temperature of temperature adjustment

Shift of the temperature adjustment when at auto duplex

Thin post card mode

Not used

Enable