Select whether to enable the host machine to work as a USB storage device or not. If the host machine is plugged into a PC with this setting enabled, it allows user

registration data (user data and telephone registration data) to be imported and exported to and from the PC, except for the data embedded in the department man-

agement information and user management IDs in the system management information.

5.1.8 Registration of Accessories (ACC)

5.1.8.1 Accessory Registration

iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i

The table below gives summary description of the accessories available.

Item

#ACC

CARD

CC-SPSW

COIN

CONTROL

5.1.9 License Management (LMS)

5.1.9.1 Outline

iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i

LMS (License Management Service)

License Management System is to acquire a figure row from sending the information of the license certificate number, which is in the same package as option

product, machine serial number and the name of the main machine to the server that has a license issue function on the Internet.

Option function will be able to be used by inputting the acquired figures from the main machine operation board through license registration screen in the users

mode.

License option function is implemented on all the main system of the products, which is shipped from the factory, but it would not activate unless input operation

has been made through the license registration screen.

Acquisition of the license key and registration of the device is basically done by the user. Detailed procedure is described in the users guide. However, as for ref-

erence, summary of the procedure is mentioned below.

(1) Access to LMS from the below URL and follow the direction on the screen to acquire the license key.

URL for LMS

http://www.canon.com/lms/license/

MEMO:

To acquire the license key, 16 digit figures on the license access number certificate and the device serial number (for example: ABC01234), which the license is

going to be installed is necessary.

Device serial number will indicate on "Serial Number" when pressing the counter confirmation key on the main machine.

(2) Copy the license key of 24 digit figures, which is indicated on the WEB browser to the designated column on license access number certificate.

Reconfirm that there is no miss-copy of the 24 digit figures. Explain to the user that license access number certificate should be kept with care.

(3) Input the copy of the license key from; user mode > system management setting> license registration and press enter. The license key will be registered and

function will activate.

If the function do not activate, error message will indicate. Confirm the points below due to contents of the error message.

"Value of the license key is incorrect. Confirm license key"

>> Using the license key, which was issued to another device?

>> Incorrect license key was input?

>> Proper license key used?

"This function is already active"

>> Isn't the relevant kit already active?

(4) Switch off the main power supply and after 10 seconds switch on the power supply again.

Function

Not used

Explanation