Activating/Deactivating The Alarm Function; Turning The Alarm Off When It Sounds; Snooze Function (Mains Operation Only); Sleep Function - Logik LHDR15 Instruction Manual

Activating/Deactivating the Alarm Function

These changes must be made with the unit in standby mode.
1. To activate or deactivate the alarm function, press the ALARM/SNOOZE button, then
press the
2. Press the SELECT button to confirm.
If you have activated the alarm function and the wake-up mode is DAB or FM,
make sure that the volume is at a sufficient level for you to hear.

Turning the Alarm Off When it Sounds

• When the alarm sounds press the

Snooze Function (Mains Operation Only)

When the alarm has been triggered, press the
ALARM/SNOOZE button to temporarily switch off the
alarm. Press the ALARM/SNOOZE button to select a
time 5 - 10 - 15 - 30 minutes. The display will show
"Zz" to indicate that snooze is on and the display will
show the minutes remaining before the alarm sounds again.
If one alarm goes off while the other is in snooze mode, snooze mode will
be cancelled.

Sleep Function

This function allows you to program the unit to switch off by itself after a set period of time.
1. Press and hold the MENU/INFO button to enter the menu.
2. Press the
3. Press SELECT to confirm.
4. Press the
5. Press SELECT to confirm.
6. Press the
7. Press SELECT to confirm.
8. When the sleep timer is zero, the unit will switch to STANDBY mode.
14
buttons to select "Alarm On" or "Alarm Off".
or
or button until "System" shows on the display.
or button until "Sleep" shows on the display.
or button to select from Sleep off/10/20/30/60/70/80/90 minutes.
STANDBY button to switch the alarm off.