7 Programming - manual
Programming door calls at the handsfree bus telephone
Application
Call from the door station to a bus
telephone.
! !
At the handsfree bus telephone
a different ring tone can
optionally be selected for the door
call. The volume of the door call can
be changed at the bus telephone.
1 Switch on the programming
mode. At the BVNG 650-..., press
the programming mode button
briefly. The LED1 flashes in a
2-second rhythm to indicate that the
programming mode is active.
4 At the door station, hold down the
required call button for 4 seconds
until a protracted tone sounds at the
door loudspeaker. The call button is
now assigned to the bus telephone.
The speech connection to the
handsfree bus telephone no longer
exists.
2 At the door station, hold down the
light/programming button for
4 seconds. A protracted
acknowledgement tone is then
audible which is briefly repeated
every 5 seconds as long as the
programming mode remains active.
5 The call button is now
permanently assigned to the
handsfree bus telephone.
Program additional users using the
same procedure or quit the
programming mode.
3 Hold down the light button for 4
seconds. A protracted
acknowledgement tone sounds in
the loudspeaker, the muting button
flashes. A speech connection exists
to the door station. The handsfree
bus telephone is now in the
programming mode.
59