Certifications And Standards - Pro-face FP5000 Series User Manual

Overview

Certifications and Standards

NOTE: Some products are not subject to certification and standards. And some products have not
received their certification and standards but are scheduled for assessment.
For information on certifications and standards, such as certified models and certificates, see the
product markings or the following URL:
http://www.pro-face.com/trans/en/manual/1002.html
Agency Certifications
Schneider Electric submitted this product for independent testing and qualification by third-party
listing agencies. These agencies have certified this product as meeting the following standards.
Underwriters Laboratories Inc., UL 508 and CSA C22.2 N

Underwriters Laboratories Inc., ANSI/ISA 12.12.01 and CSA C22.2 N

Equipment for Use in Class I, Division 2 Hazardous (Classified) Locations
IECEx/ATEX for use in zones 2/22

GOST-R or EAC certification (Russia, Belarus, Kazakhstan)

Germanischer Lloyd (GL)

Compliance Standards
Europe:
CE
Directive 2014/35/EU (Low Voltage)

Directive 2014/30/EU (EMC)

Programmable Controllers: EN 61131-2

EN61000-6-4

EN61000-6-2

Directive 94/9/EC (ATEX)

EN60079-0

EN60079-15

EN60079-31

Australia
RCM Mark

EN61000-6-4

Korea
KC Markings

KN11

KN61000-6-2

Qualifications Standards
Schneider Electric voluntarily tested this product to additional standards. The additional tests
performed, and the standards under which the tests were conducted, are specifically identified in
Structural Specifications (see page 35).
16
o
142, Industrial Control Equipment
o
213, Electrical