Blaupunkt HR50DAB Owner's Manual page 12

HR50DAB
8. Snooze: When the alarm is ring up, short press the ALARM/SNOOZE
button to cancel alarm sound and activate snooze function. The
alarm will wake up you after 10 minutes. The snooze icon
on display in snooze mode; and the alarm re-wake up remained time
will show on display.
9. Sleep:
find the "Sleep" option under the submenu of system; select the
sleep options between sleep off /15/30/45/60/90 by press
button, and press ENTER to confirm it. The icon
display when the sleep is working.
Notes:
ECO design: the unit turns to Standby mode automatically if it is not
1.
providing the main functions or inappropriate for the intended use for 60
minutes during any operating mode (except for FM mode).
The time and date can be updated automatically and synchronized with
2.
national time signals broadcast over DAB and FM RDS (when
available).There also have a " auto update" option under the " time"
submenu.
Please recheck and set up the time/alarm etc again in case of you
3.
interrupt the AC power, due to the time and alarm only work when the
main power remained.
To ensure the alarm volume is loud enough, make sure that the volume
4.
level is set at a proper position before turn off the unit.
When the alarm time is being, the alarm will ring up and increase the
5.
volume gradually till achieve the main volume setting level. When an
alarm sounds, the bell icon will flare on the display.
Press and hold ENTER button for 3 seconds to cancel the alarm sound, and
6.
it will wake up again in the coming time of next day. If you did not cancel
the alarm sound, the alarm will ring up according to the duration setting
time and off automatically.
The unit will off automatically after the sleep time being.
7.
DAB operation
Before start the DAB radio operation, please full extent the antenna, and
move the unit next to window in order to get better reception. The radio
support DAB/DAB+ digital signal reception.
Auto scan
Switch the radio to DAB mode; for the first time using or if the station list is
empty, the radio will perform a full scan and find the available station
automatically; the display will show the scan progress and the total channel
number during the scanning.
When the scan progress is completed, it will then set the time and start
playing the first station on the station list its find.
10
will show
the > or <
will show on the