Blaupunkt HR50DAB Owner's Manual page 17

Digital radio with bluetooth and usb
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
HR50DAB
Using the supplied 3.5mm audio cable(included) connect the headphone or
line out jack on your player, plug the other end of cable into the unit AUX IN
jack on back of the unit. Press the MODE button switch to AUX IN mode,
select and play the music on your player, then the audio will output from the
unit.
Notes:
a. If you connected to the line out jack of your external device, then you only
need to adjust the volume control of this unit. If you're connected to the
headphone jack of your external device, then you may need to adjust
both the volume control of your external device and the volume control
of this unit to find the most desirable volume setting.
b. Don't forget to switch off the power of your external device as well after
finish the listening
USB playback
The unit includes USB MP3 playback function which help you to enjoy the
MP3 format music from a USB storage device. Before start the playing,
please copy the MP3 format music into your USB storage device. Then press
the MODE button switch to the USB mode. Insert your USB device into the
USB port on the rear panel of unit. The unit will decode the MP3 music and
sound output automatically after few seconds.
In USB playback, press
word "Playing" disappears simultaneously; press > button skip to next track
or press < button skip to previous track.
To remove your USB device, simply stop the playback and gently unplug it
from the USB port.
Notes:
a. We do not recommend to connect the USB port with USB device by a USB
extent cable which may cause intermittent sound output due to impact
the audio signal transfer.
b. The supported USB device storage is 16G max.
USB charging
The unit includes USB charging function (common use the MP3 playback
USB port on the back panel of unit) which can charge other USB power
device. The USB charging rating output is 5V/1A. Please check your device
USB rating power request before start the charging connection.
Using your device's USB power cord connect your device and insert another
terminal into the USB port of unit. Then the unit will start to charge your
device after connection successfully. Please double check the charging light
or symbol on your device in order to make sure the charging is working
successfully.
button to pause the playback, and the display
15

Advertisement

Table of Contents
loading

Table of Contents