Blaupunkt HR50DAB Owner's Manual page 13

Digital radio with bluetooth and usb
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
HR50DAB
To select the station, press < or > button to scroll through the list of stations
and short press ENTER button to tune the displayed station. The "Now
playing "screen is displayed with the new station details.
If no stations are detected during the scan the display will show "NO DAB
Station".
Manual tune
As well as the normal method of scanning, you can also manually tune to a
particular channel/frequency. This can be useful for adjusting your antenna
to achieve the best possible reception and scanning a particular channel to
update the station list.
1.
Press MENU button and then press > to show the submenu: manual
tune, press the ENTER button to select it.
2.
Press < or > to display a particular channel/frequency, press ENTER
button to tune to that channel/frequency. The display will show a live
indication of the received signal strength on the selected frequency. Try
to Adjust the antenna can be manifested in the received signal strength
displayed.
Notes:
1. Just like Digital TV there are some areas where it may still be difficult to
get a good DAB signal. The broadcasters are constantly improving DAB
coverage, so in some cases it may be necessary to wait before some or all
DAB services become available. You can check coverage for your area.
2. You may need perform a manual scan to update the list of stations for one
of the following reasons:
2-1. new station becomes available.
2-2. Stations close or can no longer be received (In the station list, invalid
stations are indicated with a question mark "?" in front of their name).
2-3. if reception was not good for the original scan (for example the antenna
was not extent), this may result in an empty or incomplete list of available
stations.
2-4. if you have poor reception of some stations causing the output sound
intermittently, you may wish to list only stations with good signal
strength.
3. To re-do a full scan, you may short press the MENU button to show the
menu and then short press ENTER button to select Full Scan
11

Advertisement

Table of Contents
loading

Table of Contents