Description Of Function & Circuit Of Micom - Kenmore 795.71012.010 Service Manual

8. DESCRIPTION OF FUNCTION & CIRCUIT OF MICOM
8-1 FUNCTION
8-1-1 Function
1. When the appliance is plugged in, it is set to 37 for Refrigerator and 0 for freezer.
You can adjust the Refrigerator and the Freezer control temperature by pressing the ADJUST button.
2. When the power is initially applied or restored after a power failure, it is automatically set to 37 & 0.
3. If you do not press any button after turning on the power, LEDs on the display panel will be turned off within 60 seconds.
(Power Save Mode)
4. If you press a button, LEDs on the display panel will be turned off within 20 seconds. (Power Save Mode)
5. If you do not want to use the Power Save Mode, you can change the mode by pressing the Ultra Ice button and
Frz Temp button simultaneously for more than 5 seconds.
8-1-2 How to Change the Temperature Mode to °F / °C
1. The setting temperature mode can be changed to °F / °C by pressing and holding Frz Temp key of Frz and Ref Temp
key of Refrigerator over 5 seconds.
2. The initial setting is °F. Whenever the mode is changed, the LED lights are changed.
8-1-3 Lock function (dispenser and display button lock)
1. In power application of refrigerator, the LOCK icon is turned off
at the upper side of lock graphic of display with the lock release
status.
2. If desiring to lock the display the dispenser and control panel
push on the LOCK button more than 3 seconds. LOCK text is
turned on at the upper side of lock graphic of display with lock
status.
3. The buzzer sound and control panel and dispenser function is
not performed even if pressing display button other than lock key
in the lock status.
4. If desiring to release the lock status and pressing the lock button
more than 3 seconds. LOCK icon is turned off at the upper side
of lock graphic of display with the lock release status.
8-1-4 Filter condition display function
1. There is a replacement indicator icon for the water filter
cartridge on the dispenser.
2. Water filter needs replacement every months.
3. Water filter icon turns on to tell you need to replace the
filter soon.
4. After replace the filter, press and hold the lock button
more than 3 seconds.
Then water filter light turns off with reset status.
8-1-5 Ultra Ice selection
Please select this function for prompt freezer.
• Function is repeated following below whenever pressing Ultra Ice button.
• Ultra Ice function automatically turns off if a fixed time passes.
Ex) In selecting
In initial Power On
Classification
/ Filter RESET
Filter Status
Display
- 25 -
Ex) In selecting
LOCK LOCK again
Replace indicator
light on