Winmate A831 User Manual page 17

3.5 inch fanless sbc w/amd geode lx 800, vga, lcd, ethernet and cf socket and mini-pci interface.

Table of Contents

Chapter 2

2.1 Memory Module（SODIMM）Installation

The A831 SBC provides one 200-pin SODIMM slot. The socket supports up to 1GB

DDR 400 SDRAM. When installing the Memory device, please follow the steps

below：

Step.1. Firmly insert the SODIMM at an angle into its slot. Align the SODIMM on the

slot such that the notch on the SODIMM matches the break on the slot.

Step.2. Press downwards on SODIMM until the retaining clips at both ends fully snap

back in place and the SODIMM is properly seated.

Caution

The SODIMM only fits in one correct orientation. It will cause

permanent damage to the development board and the SODIMM if

the SODIMM is forced into the slot at the incorrect orientation.

A831 SBC User Manual

Installations

Table of Contents