Installation Of The Status Monitor - Allen-Bradley FAST TRACK Manual

4.2 Installation of the Status Monitor

The Status Monitor will inform you about the status of the printer, any failures that might occur (e.g.
paper jam) and the current level of all ink cartridges. The screen will appear automatically with every
started print job. In the Utility menu you are able to activate or deactivate the Status Monitor.
To use the Status Monitor you have to install it separately!
Installation under Windows NT
Please do not install the status monitor if you wish to connect the FAST TRACK
1. In the window please click the button Status Monitor.
2. The software installation window will open, click Next to start the installation.
3. Follow the instructions on the monitor.
It is possible that the Status Monitor creates problems once it is used in a network. In this case please
uninstall the Status Monitor or deactivate it with the following steps:
•
Click Start > Settings > Printer.
•
Select the Epson Stylus C62.
•
Open Printer settings.
•
On the Utility tab, click the Speed and Progress button.
•
In the window that opens, clear the Show Progress Meter check box. Click OK to confirm.
TM
Printer to a network.
9