Safety Precautions; Safety Instructions - Allen-Bradley FAST TRACK Manual

3. Safety precautions

3.1 Safety instructions

•
Remove all shipping braces; open the FAST TRACK
lock from the print head.
•
Read the following instructions carefully before starting up the FAST TRACK
the warnings and notices on the FAST TRACK
•
Do not block or cover openings in the housing of the FAST TRACK
•
Do not insert any objects into these openings.
•
Do not spill any fluids onto the "FAST TRACK
•
The main voltage must correspond to the system voltage given on the FAST TRACK
label.
•
Connect the device to a properly earthed socket outlet only. It must not be connected to a socket
outlet already being used by devices that are turned on and off at regular intervals, such as
photocopiers or ventilators.
•
Do not connect the FAST TRACK
outlet.
•
Do not use the computer system close to potential electromagnetic disturbance fields such as
loudspeakers or base transceiver stations for mobile telephones.
•
Never use damaged or worn out power cables.
•
If you connect the FAST TRACK
that the total nominal current of all of the devices connected to the extension cable does not
exceed the ampacity for that extension cable. In addition, you should ensure that the total
nominal current of all the devices plugged into the wall-mounted socket outlet does not exceed
the current carrying capacity for that socket outlet.
•
Do not carry out repairs to the device yourself.
•
Disconnect the FAST TRACK
following occurs:
•
The power supply cable or the plug is damaged or worn.
•
Fluids have penetrated the FAST TRACK
•
The FAST TRACK
•
The FAST TRACK
malfunctions.
Caution: Warning signs to BGV A 8 (VBG 125), German employers liability insurance
regulations, & German standard DIN 4844.
Warning - Mind your hands
Do not reach inside
Warning - Hot surface
Do not touch
TM
TM
TM
Printer to either a switched or a timer-controlled socket
TM
Printer to the power supply via an extension cable, ensure
TM
Printer and contact a qualified service engineer if any of the
TM
Printer has been dropped or the housing damaged
TM
Printer does not operate normally or there are obvious signs of
TM
Printer cover and remove the transport
at all times.
TM
Printer.
Printer.
TM
Printer.
TM
Printer. Observe
TM
Printer
3