Ab-Print Software Settings - Allen-Bradley FAST TRACK Manual

4.5 AB-Print Software Settings

Allen Bradley marker cards are made from polyamide. Polyamide reacts to fluctuations in the climate
conditions (temperature and air humidity), which can result in changes of up to 1% in the dimensions of
the Marker cards. Necessary adjustments can be made in the AB-Print configuration editor.
In order to check the settings, switch off the fusing unit. You can re-use the Marker Card once
you have checked the dimensions; to do so, simply wipe away the markings using a damp cloth.
Launch AB-Print: Click > Start > Programs > AB-Print or click the AB-Print link. To view the value of the
Printer Settings click File > Print > Settings. In this window you can make the necessary changes to the
settings. The values given are intended as a guide only. They vary according to the operating system
used.
Select the printer driver: EPSON Stylus C62 Series
Click accept, and click Cancel to close the other open window.
TM
Ensure that the FAST TRACK Printer is connected to your PC and turned on.
Setting the zero reference point in the AB-Print Software
Launch AB-Print: Click > Start > Programs > AB-Print or click the AB-Print link. To view zero reference
point click Options > Edit Marker Card Configurations. In this window you can make the necessary
changes to the settings. The values given are intended as a guide only. They vary according to the
operating system used.
13