Monitor/Test; Monitor/Test Screen - Mitsubishi Q64AD User Manual

5 UTILITY PACKAGE (SW0D5C-QADU-E)

5.6 Monitor/Test

5.6.1 Monitor/test screen

[Purpose of setting]
Buffer memory monitoring/testing, I/O signals monitoring/testing, operating condition
setting, offset/gain settings (see Section 5.6.2) are started from this screen.
[Startup procedure]
Monitor/test module selection screen
"Module model name"
Enter the start I/O numbers in hexadecimal.
[Setting screen]
X/Y monitor/test
"Start I/O No. "
Monitor/test
5 - 14
MELSEC-Q
"Package name"
Max value/min value info.
1)