Badger Meter Blancett B2800 Standard User Manual page 7

Example
If the meter was calibrated in US gallons, use PUL/GAL�
Press ENTEO to save the K-factor unit and advance to the K FACTOR parameter�
N OTEE:
Unless otherwise specified, Blancett turbine flow meters are supplied
with K-factors measured in pulses per gallon (PUL/GAL) which will
automatically convert to your desired units of measure�
Enter The Meter's K-Factor
N OTEE:
The K-factor supplied with the meter or calculated from calibration data is
needed to set this parameter�
To change the K-factor value, press OIGHT to select the digit that you wish to change� Press
UP to increment the digit until it matches the meter's K-factor� Repeat this process until all
K-factor digits have been entered� Press ENTEO to save the K-factor and advance to RATE/
TOTAL�
Select the Units of Measure
The monitor is programmed with five common rate/total unit options� The monitor shows
the rate/total unit that the display is currently set for� If the current selection is correct, press
ENTEO once to advance to the DISPLAY FUNCTION parameter� To change the unit, press UP
or OIGHT to scroll to the correct rate unit� Press ENTEO to save and advance to the DISPLAY
FUNCTION parameter�
Selection
GPM/GAL
LPM/LIT
M3PH/M3
M3PD/M3
BPD/BBL
Select the Display Function
The monitor displays RATE, TOTAL, alternates between BOTH rate and total or TEST� If the
current selection is correct, press ENTEO to advance to the next parameter� To change to an
alternate display mode, press UP or OIGHT to scroll to the correct display mode and press
ENTEO to save and advance to the TOTALIZER PULSE OUTPUT parameter�
The TEST function acts like a frequency counter and displays the raw input frequency being
supplied to the frequency input terminals� This is very useful when troubleshooting flow
problems�
March 2017
Oate
Gallons per minute
Liters per minute
Cubic meters per hour
Cubic meters per day
Oil barrels per day
DSY-PM-00276-EN-04
Programming
Total
Gallons
Liters
Cubic meters
Cubic meters
Oil barrels
Page 7