Fuses - Toro ProCore 648 Service Manual

Fuses

The fuse block is located behind the console cover (Fig.
27).
Identification, Function, and Wiring
The fuses are held in the fuse block. Use Figure 28 to
identify each individual fuse and its correct amperage.
Each fuse holder has the following functions:
Fuse 1 (20 Amp): Supplies power to ignition switch
terminal B.
Fuse 2 (10 Amp): Supplies power to electric clutch.
Fuse 3 (10 Amp): Supplies power from ignition
switch terminal S.
Fuse 4 (2 Amp): Supplies power to aerator control
module.
Testing
Remove fuses from the fuse block for testing. Fuse
should have continuity between fuse terminals.
ProCore 648
Fuse 1
Fuse 2
Fuse 3
Fuse 4
Page 5 – 21
1
Figure 27
1. Fuse block
UP
20A
10A
10A
2A
Figure 28
Electrical System