Setting Parameters; Extended Length Pulse Function Block (Tq) - ABB REL 551-C1*2.5 Technical Reference Manual

6.7.1
6.8
6.8.1
48
Configurable logic blocks (CL1)
Table 47: Output signals for the TP (TPnn-) function block
Signal
OUT

Setting parameters

Table 48: Setting parameters for the Pulse (TPnn-) function
Parameter Range
T 0.000-60.000
Step:0.010

Extended length pulse function block (TQ)

The function block TQ pulse timer with extended maximum pulse length, is identical with the
TP pulse timer. The difference is the longer pulse length.
TQ01-
PULSELONG
INPUT OUT
T
xx00000164.vsd
Table 49: Input signals for the PULSELONG (TQnn-) function block
Signal
INPUT
T
Path in local HMI: ServiceReport/Functions/pulseLongn
Table 50: Output signals for the PULSELONG (TQnn-) function block
Signal
OUT
Setting parameters
Table 51: Setting parameters for the PulseLong (TQnn-) function
Parameter Range
T 0.0-90000.0
Step: 0.1
Description
Output from pulse timer
Default Unit Description
0.010 s Pulse length. Can only be set from CAP
configuration tool.
Description
Input to pulse long timer
Pulse length. See setting parameters
Description
Output from pulse long timer
Default Unit Description
0.0 s Pulse length. Can only be set from CAP
configuration tool.
Chapter 3
Common functions