Ambient Conditions - Siemens SIMATIC IPC427E Operating Instructions Manual

Technical specifications
8.5 Technical specifications
8.5.2

Ambient conditions

Climatic Conditions
Temperature
- During operation
- During storage/shipping
- Gradient
Relative humidity
- During operation
- During storage/shipping
Barometric pressure
- During operation
- During storage/shipping
108
Tested to IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-14
Horizontal mounting position:
Operation with hard disk:
with up to two expansion cards
•
(max. load 12 W) in RAL
Operation with CFast card and/or SSD:
with up to 2 expansion cards
•
(max. load 12 W) in RAL
Operation with CFast card:
with up to 2 expansion cards
•
(max. load 12 W) in RAL
Without expansion cards in RAL
•
Vertical / portrait mounting position:
Operation only with CFast card and/or SSD drive:
with up to 2 expansion cards
•
(max. load 12 W) in RAL
Horizontal mounting position:
Operation with CFast card
Without expansion cards in RAL
•
This information applies to the setting "Standard" in the BIOS Setup,
1
Menu "Power" > "Power&Performance" > "CPU Power Management
Control" > "CPU Power Level"; the ambient temperature must be re-
duced by 5 °C for the setting "Performance Optimized".
RAL = Restricted Access Location
2
Installation of the device in operating facilities with restricted access, for
example, locked control cabinet.
-40°C to +60°C (for device with HDD) or
-40°C to +70°C (for devices with CFast or SSD)
Operating mode: Max. 10°C/h; Storage: 20°C/h; no condensation
tested to IEC 60068-2-78, IEC 60068-2-30
5% to 80% at 25° C (no condensation)
5% to 95% at 25 °C (no condensation)
1080 up to 689 hPa,
(corresponds to an elevation of -1000 to 3000 m)
1080 to 660 hPa
(corresponds to an altitude of -1000 m to 3500 m)
: +5 to +35 °C
2 1
: 0 to +45 °C
2 1
: 0 to +50° C
2 1
: 0 to +55° C
2 1
: 0 to +45 °C
2 1
: 0 to +30° C
2 1
Operating Instructions, 09/2017, A5E37454814-AB
SIMATIC IPC427E