Siemens SIMATIC IPC427E Operating Instructions Manual page 70

Expanding and assigning parameters to the device
6.3 Installing and removing PCIe cards
1. Remove the screw in the blanking plate
for the slot you require and remove the
blanking plate.
2. Remove the retainer.
3. Insert the expansion card into the slot as
shown.
Secure the expansion card with the cor-
responding screw.
4. Slide the clamp in the direction indicated.
Secure the bracket with the designated
screw.
5. Close the device as specified in section "Opening the device containing expansion cards
(Page 63)".
Removal
Proceed in reverse order.
Configuring BIOS setup
You may need to make settings in the BIOS Setup. For detailed information about
installation, please refer to the documentation provided with the specific expansion card.
70
Operating Instructions, 09/2017, A5E37454814-AB
SIMATIC IPC427E